Skip to main content
mp1900a-signalqualityanalyzer

Signal Quality Analyzer-R

MP1900A
Overview
PAM4 Test Solution
downloadView Product Brochure  UPDATED
downloadView Product Introduction  UPDATED
playVideo  UPDATED
High-Speed Serial BUS Interface Test Solution (PCI Express, USB, Thunderbolt)
downloadView Product Brochure  UPDATED
downloadView Product Introduction
playVideo

Outline

To cope with increasing data traffic caused by the widespread popularity of smartphones and mobile terminals, data-center network interfaces are being transitioned to the faster 200 and 400 GbE standards, while communications-equipment interconnects are adopting PCI Express Gen4 supporting faster speeds of 16 Gbit/s; multi-channel technologies are also being deployed.
Anritsu’s Signal Quality Analyzer-R MP1900A series is a high-performance BERT with 8 slots for modules, such as PPG, ED and Jitter/Noise Generator, to expand measurement applications supporting signal integrity analyses of ever-faster devices. In addition to Physical layer measurement functions for broadband network interfaces, the all-in-one MP1900A supports PCI Express bus, etc., interface measurements.

[Target Applications]
100 GbE/200 GbE/400 GbE, CEI-25G/28G/56G/112G, InfiniBand EDR/HDR, Fibre Channel, PCI Express Gen 1 to 5, Thunderbolt 3, USB3.1 Gen1/2, Optical modules, SERDES, AOC, High-speed Interconnects

Anritsu MP1900A BERT for Ethernet and PCI Express of data-center
PAM4 Test Solution
downloadView Product Brochure
downloadView Product Introduction
playVideo
  • 512 Gbit/s max. transmission capacity
  • PAM4 PPG/ED (MU196020A/MU196040A)
    Baud rate of 2.4 to 64.2 Gbaud*1
    Multichannel Scalability 4ch PAM4/NRZ  NEW
    High-speed Tr/Tf of 8.5 ps (20 to 80%)
    Low Intrinsic Jitter output of random Jitter 170 fs rms (typ.)
    Low noise and low distortion high-quality data output
    4Tap Emphasis (20-dB Range)
    ISI adjustment function  NEW
    FEC pattern generation  NEW
    Stressed margin BER < E-12*2
    Built-in Clock Recovery
    PAM4 pattern editor and symbol error measurement
  • Jitter Addition, Jitter Tolerance measurement functions (SJ/RJ/BUJ/SSC)
  • Voltage Noise Addition function (Common/Differential/White Noise)
  • Jitter Tolerance measurement using DUT BER counter function  NEW
*1: Future support for ED (Over 32.1G)
*2: At PAM4 Stressed waveform input refer to CEI
PAM4 Solution (Max. 64 Gbaud at 1CH)
PAM4 Solution (Max. 64 Gbaud at 1CH)
High-Speed Serial BUS Interface Test Solution (PCI Express, USB, Thunderbolt)
downloadView Product Brochure
downloadView Product Introduction
playVideo
  • 512 Gbit/s max. transmission capacity, one main frame expandable to 16ch (filling 8 slots with 32 Gbit/s 2 ch PPG)
  • All-in-one support for both high-speed Ethernet and PCI Express interface tests
  • New wideband 32 Gbit/s SI PPG/ED (MU195020A/MU195040A)
    • Bit rate of 2.4 Gbit/s to 32.1 Gbit/s
    • NRZ/PAM4 Support
    • 10Tap Emphasis
    • Variable ISI function
    • Multi-band CTLE (8 Gbit/s, 16 Gbit/s, 28 Gbit/s bandwidths)
    • Low Intrinsic Jitter output of random Jitter 115 fs rms (typ.)
    • High-sensitivity Data input of 15 mV typ. (EYE Height)
    • 1ch/2ch Selection
  • PCI Express Link Training, LTSSM analysis (using MU195020A/MU195040A/MX183000A-PL021)
  • USB Express Link Training, LTSSM analysis (using MU195020A/MU195040A/MX183000A-PL022)
  • Jitter Addition, Jitter Tolerance measurement functions (SJ/RJ/BUJ/SSC, using MU181500B/MX183000A-PL001)
  • Voltage Noise Addition function (Common/Differential/White Noise, using MU195020A/MU195050A)
NRZ Solution (Max. 32 Gbit/s at 1ch)
NRZ Solution (Max. 32 Gbit/s at 1ch)
Specifications

downloadView Data Sheet  UPDATED

Typical Specifications

  • Signal Quality Analyzer-R MP1900A
Item Specification
LCD 12.1-inch, WXGA 1280 x 800
Remote Interface GPIB, LAN
Module Slots 8
External Peripheral I/F USB x6, VGA x1, HDMI x1
OS Windows Embedded Standard 7
Power 100V(ac) to 120V(ac)/200V(ac) to 240 V(ac)
50 Hz to60 Hz
Power Consumption 1350 VA max.
Dimensions/Mass 340 (W) x 222.5 (H) x 451 (D) mm/20 kg max. (excluding modules)
  • Noise Generator MU195050A
Item Specification
No. of Channels 2
Insertion Loss -3 dB
CMI 0.1 GHz to 1 GHz/1 GHz to 6 GHz
DMI 2 GHz to 10 GHz
White Noise 10 MHz to 10 GHz
Crest Factor >5
  • PAM4 PPG MU196020A
Item Specification
Operation Rate (PAM4/NRZ) 2.4 Gbaud to 32.1/58.2/64.2 Gbaud (option selection)
No. of Channels 1
Output Amplitude 70 mVp- to 800 mVp-p (Single-end)
140 mVp- to 1600 mVp-p (Differential)
Offset -2 V to +3.3 V
Emphasis 4 Tap, -20 to +20 dB
Channel Emulator Generates waveform with insertion loss and simulates waveform with corrected insertion loss
Set by loading S-Parameter file (S2 P, S4 P)
ISI Simulates ISI generation waveform
Set using loss (–8.00 to 8.00 dB) at CEI-specified Nyquist frequency
Used in combination with channel board, such as J1800A/J1758A (optional accessories parts), or Noise Module MU195050A
Independently Variable PAM4 3 Eye 20 to 50% (PAM4 Amplitude 0/3 level = 100%)
PAM4 Pattern SSPRQ, PRBS13Q, PRBS31Q, RS-FEC, etc.
PAM4 Pattern Error Addition MSB Error, LSB Error, LSB&MSB Error, RS-FEC Symbol Error
Tr/Tf (20 to 80%) 8.5 ps (typ., NRZ)
Random Jitter 170 fs rms (typ., NRZ)
I/O Connector V (f)
  • PAM4 ED MU196040B  NEW
Item Specification
Operation Rates (PAM/NRZ) 2.4 to either 32.1 Gbaud, or 58.2 (PAM4)/64.2 (NRZ) Gbaud (option selection)
No. of Channels 1
Input Amplitude NRZ: ≤32.1G: 0.05 to 1.0 Vp-p; >32.1G: 0.1 to 1.0 Vp-p
PAM4: ≤32.1G: 0.3 to 1.0 Vp-p; >32.1G: 0.4 to 1.0 Vp-p
Input Sensitivity (Eye Height) NRZ: 19 mV @ 26.5625 Gbaud; 21 mV @ 53.125 Gbaud
PAM4: 23 mV @ 26.5625 Gbaud; 36 mV @ 53.125 Gbaud
Clock Recovery (Option) 2.4 to 32.1 Gbaud; 51 to 58.2 Gbaud
Equalizer (Option) Low-frequency Equalizer (≤1 GHz, 2 dB typ.) + DFE (1.4 dB typ.)
PAM4 Patterns SSPRQ, PRBS13Q, PRBS31Q, etc.
PAM4 Counter MSB, LSB, Symbol 0 to 3 (Option)
Input Connector V (f)
  • 21G/32G bit/s SI PPG MU195020A
Item Specification
Operation Bit Rate (NRZ) 2.4 Gbit/s to 21 Gbit/s or 32.1 Gbit/s
No. of Channels 1 or 2
Output Amplitude 0.1 Vp-p to 1.3 Vp-p (Single-end)
0.2 Vp-p to 2.6 Vp-p (Differential)
Emphasis 10Tap
Channel Emulator Normal: Emulates Insertion Loss using S-parameters
Inverse: Performs De-Emphasis compensation for S-parameter Insertion Loss
S-Parameter file: S2P,S4P
ISI Emulates output for ISI using CEI-28G/25G Nyquist frequency loss setting
Supports loss control in combination with J1758A ISI Board accessory
Insertion Loss setting:1.5 to 25 dB, 0.01 dB step, Nyquist frequency
0 to 25 dB, 0.01 dB step, 1/2 Nyquist frequency
Tr/Tf (20% – 80%) 12 ps (typ.)
Random Jitter 115 fs rms (typ.)
PCIe Link Training Supported (MX183000A-PL021)
Output Connector K (f)
  • 21G/32G bit/s SI ED MU195040A
Item Specification
Operation Bit Rate (NRZ) 2.4 Gbit/s to 21 Gbit/s or 32.1 Gbit/s
No. of Channels 1 or 2
Input Amplitude 0.05 Vp-p to 1.0 Vp-p (Single-End)
0.1 Vp-p to 2.0 Vp-p (Differential)
Input Sensitivity (Eye Height) 15 mV (Eye Height 28.1 Gbit/s)
30 mV/Eye(28.1 Gbaud, PRBS15, PAM4)
CTLE Peak Frequency 14, 8, 4 GHz
Gain 0 to –12 dB
Clock Recovery Yes, SSC support
PCIe and USB Link Training Supported (MX183000A-PL021, MX183000A-PL022)
Ouput Connector K (f)

Modules for the MP1800A series can be used in the MP1900A. Refer to the selection guide for more details.

APPLICATIONS
Library
VIDEOS
Anritsu IoT measuring instruments

Anritsu IoT measuring instruments
Anritsu IoT measuring instruments: IoT,Testing,Test Solution, IoT Products,RF/Wireless Components Conformance Test, 5G IoT and High Speed Devices.

mp1900a-en-1st

Signal Quality Analyzer-R MP1900A PAM4 Solution
The Signal Quality Analyzer-R MP1900A series of high-performance BER testers (BERT) is designed to measure 400GbE and future 800GbE interfaces

MP1900A_E-201804

Signal Quality Analyzer-R MP1900A
The Signal Quality Analyzer-R MP1900A series is a high-performance BERT with excellent expandability for supporting Physical layer evaluations.

How to Prevent ESD and EOS Damaging Measuring Instruments and DUT

How to Prevent ESD and EOS Damaging Measuring Instruments and DUT
Learn the necessary steps to prevent ESD/EOS damage to your DUT and your measuring instrument.

Related Product
Confirm your country below to see local events, contact information and special offers.