Anritsu Corporation (President Hirokazu Hamada) is pleased to announce the release of strengthened functions for its Signal Quality Analyzer-R MP1900A PCI Express*1 receiver tests.
These strengthened functions upgrade the high-quality waveform performance of the PAM4*2 PPG MU196020A to the latest high-speed, large-capacity PCI Express standards for PCIe receiver tests. As a result, customers planning and developing PCIe Gen 6 (PAM4 32 Gbaud) products for data centers and other applications now have an all-in-one measuring instrument covering future PCIe Gen 6 upgrades as well as current PCIe 3.0/4.0/5.0 receiver tests.
Testing of fifth-generation (5G) communications network systems meeting enhanced Mobile Broadband(eMBB), Ultra-Reliable and Low Latency Communications(URLLC), and massive Machine Type Communication(mMTC) requirements is in progress. On the other hand, this paradigm shift is increasing the need by data centers, forming the foundation of this technological revolution to process large data volumes at high speeds. In line with this need, while data centers are planning introduction and compliance testing*3 of PCIe 5.0 interfaces for their transmission equipment, servers, storage, etc., by late 2020, PCI-SIG*4 has already started planning and defining the future next-generation PCIe 6.0 standard using PAM4 32-Gbaud technology.
Anritsu is offering this all-in-one test solution covering both future PCIe 6.0 evaluations and current PCIe 5.0 compliance tests to help speed its customers’ product times to market.
New Product Outline
The Signal Quality Analyzer-R MP1900A series are multichannel bit error rate (BER) measuring instruments required for designing and inspecting next-generation network interfaces, such as 400 and 800GbE*5, as well as high-speed bus interfaces, such as PCI Express 4.0/5.0, USB3.2/4, Thunderbolt, etc.
These added functions support early-stage development of PAM4 PCIe 6.0 equipment using the PAM4 PPG MU196020A with high-quality data output performance. Moreover, combined use with the existing SI ED MU195040A PCI solution supports PCIe 3.0/4.0/5.0 compliance tests as an all-in-one solution for PAM4 performance evaluations and compliance tests.
Outline of Other Added Functions
These version upgrades add the following functions.
- Equalizer*6 Search function for easy PAM4 BER measurement using high-performance PAM4 ED MU196040B and Eye Contour functions for evaluating PAM4 signal Eye margin characteristics.
- SAS3/4*7 and DP1.4*8 receiver tests using PPG/ED MU195020A/MU195040A.
About Automation Software
High-reproducibility PCIe 3.0/4.0/5.0, SAS3/4 and DP1.4 measurements at reduced workloads are achieved using Granite River Labs (GRL) automation software for automatic signal calibration and testing.
Target Markets and Application
- Target Markets: High-end servers, high-performance computers, 400GbE communications equipment
- Applications: BER measurement of high-speed electronic devices, chipsets, memory cards, 400GbE communications equipment
*1 PCI Express
PCI Express is one bus standard for connecting computers and peripherals; there are currently five generations (Gen 1.0 to Gen 5.0) supporting different speeds and Gen 6.0 is now in development.
PAM (Pulse Amplitude Modulation) is a transmission technology using control of changes in voltage amplitude (pulse height). PAM4 transfers 2 bits of information using four voltage levels in one time slot.
*3 Compliance Test
This test is used to validate compliance with the test method and pass/fail standards regulated by PCI-SIG.
PCI-SIG is a world standards organization managing open standards for PCI. The organization formulates I/O (Input/Output) industry-wide standards meeting the needs of its member companies. There are currently almost 800 members from world-leading businesses. Refer to the website at www.pcisig.com for more details about PCI-SIG and board members. PCI Express is a registered trademark of PCI-SIG.
*5 400 and 800GbE
These are IEEE communications standards.
This is a signal conditioning (signal tuning) technology used at data transmission to optimize the signal transmission frequency characteristics.
SAS (Serial Attached SCSI) is an interface standard for connecting storage devices to computers.
DP (DisplayPort) is a digital interface standard for video transmission.
Anritsu Company is the United States subsidiary of Anritsu Corporation, a global provider of innovative communications test and measurement solutions for 120 years. Anritsu’s “2020 VISION” philosophy engages customers as true partners to help develop wireless, optical, microwave/RF, and digital solutions for R&D, manufacturing, installation, and maintenance applications, as well as multidimensional service assurance solutions for network monitoring and optimization. Anritsu also provides precision microwave/RF components, optical devices, and high-speed electrical devices for communication products and systems. The company develops advanced solutions for 5G, M2M, IoT, as well as other emerging and legacy wireline and wireless communication markets. With offices throughout the world, Anritsu has approximately 4,000 employees in over 90 countries.
To learn more visit www.anritsu.com and follow Anritsu on Facebook, LinkedIn, Twitter, and YouTube.
Anritsu India Pvt Ltd
Ground Floor, Office No.19
Logix Infotech Park, D-5, Sect 59
NOIDA 201301 (UP)
Phone 91 120 4211330-32