Download Center

Power Meters, Power Sensors, and Power Analyzer Product Information, Compliance, and Safety

This guide provides important notices, warranty, safety, and regulatory compliance information for the Anritsu Power Meters, Power Master™, USB Power Sensors, Thermal Sensors, and Diode Sensors. Be sure to read these important notices before operating the equipment. P/N: 10100-00066

Anritsu's RF and Microwave Test and Measurement Solutions Product Brochure

Overview of RF and Microwave instruments available to meet a variety of solutions. Featuring the frequency range, measurements, and other key features. P/N: 11410-00800

Power Measurement Solutions

Download this solution card for an overview of the Power Sensors and Meters available from Anritsu. P/N: 11410-00558

Power Meters Quick Fact Sheet

Offering a comprehensive range of power meters. The ML2490A series has the performance required for narrow fast rising-edge pulse power measurements such as radar. The ML2430A series of power meters are designed for CW applications, offering a combination of accuracy, speed, and flexibility in a low cost package. P/N: 11410-00652

Power Meters and Power Sensors Technical Data Sheet

The ML2490A series has the performance required for narrow, fast rising-edge pulse power measurements (for example, radar), while the ML2480B series is suited for wideband power measurements on signals such as W-CDMA, WiMAX, LTE, and WLAN. The ML2430A series of power meters are designed for CW applications, offering a combination of accuracy, speed and flexibility in a low cost package. P/N: 11410-00423

ML248xB / ML249xA Wideband Peak Power Meter Operation Manual

This manual provides set-up and operational information for the ML2487B / ML2488B and ML2495A / ML2496A Peak Power Meters.

PowerMax (MX249001A) Ethernet Software for use with the ML248xB and ML249xA Power Meter

This manual provides an overview to the PowerMax software (MX249001A) for use with the ML248xB and ML249xA power meters. No prior knowledge of PowerMax is assumed, although a familiarity with the purpose and operation of the ML248xB and ML249xA models is required.

Power Sensors MA24xxA,B,D and MA2400xA

This manual provides descriptions and specifications for Anritsu Power Sensors that are used in conjunction with Anritsu power meters. It includes care, handling and performance verification information. P/N: 10585-00004

Wideband Peak Power Meter ML248xA/8xB/9xA Maintenance Manual

This manual provides general information, performance verification, calibration, theory, and service information for the Anritsu Power Meters (ML2487/8A, ML2487/8B and ML2495/6A).

Power Meters ML243xA, ML248xA/B and ML249xA Firmware Upgrade Guide

This user guide provides instructions on how to install firmware updates on the ML2400 Series Power Meters using the Anritsu Bootloader Software Utility. Requirements Anritsu bootloader software utility Bootloader cable (Anritsu part number B41323 – a 9 pin female to 9 pin female RS-232 cable, with TX & RX swapped, CTS & RTS swapped, and DTR & DSR swapped) Anritsu ML2400 series power meter (ML2437A, ML2438A, ML2487A/B, ML2488A/B, ML2495A, or ML2496A) The associated new firmware files Intel-based PC with a Pentium or equivalent processor and the Microsoft® Windows® 2000, Windows XP, or the Windows 7 operating system (32- or 64-bit) Note Both the Anritsu Bootloader software utility and power meter firmware can be downloaded from www.anritsu.com. These files will be under the Library tab on the associated product page under the Drivers, Software Downloads heading.

Radar Testing with Simulation Signals

This application note describes a process for simulating radar signals using an Anritsu MG3690C Series Microwave Signal Generator, an ML2490A Series Power Meter and MA2411B Power Sensor, and Anritsu PowerMax Software.

Power Meters and Sensors

The ML2490A series has the performance required for narrow fast rising-edge pulse power measurements (e.g. radar). The ML2480B series is suited for wide-band power measurements on signals such as LTE, W-CDMA, WLAN, and WiMAX. The ML2430A series of power meters are designed for CW applications, offering a combination of accuracy, speed and flexibility in a low cost package. With seven different families of power sensors to choose from, you can trust you’ll find the right combination for precision power measurement, whatever your application.

Wideband Peak Power Meter ML248xB/ML249xA Remote Programming Manual

This manual provides detailed information of the GPIB mnemonics for the ML2487B / ML2488B and ML2495A / ML2496A Peak Power Meters. Explanations in this manual apply equally to all units mentioned above unless otherwise stated.

Rack Mount Kit Installation Guide

The Rack Mount Kit MT8852B can be ordered with rack mounting hardware that allows it to be mounted into a standard 48 cm equipment rack. P/N: 10585-00025

Pre Calibration Range Calibrator ML2419A Verification Spreadsheet For ML2487/8X and ML249XA