Download this solution card for an overview of the Power Sensors and Meters available from Anritsu. P/N: 11410-00558
Offering a comprehensive range of power meters. The ML2490A series has the performance required for narrow fast rising-edge pulse power measurements such as radar. The ML2430A series of power meters are designed for CW applications, offering a combination of accuracy, speed, and flexibility in a low cost package. P/N: 11410-00652
The ML2490A series has the performance required for narrow, fast rising-edge pulse power measurements (for example, radar), while the ML2480B series is suited for wideband power measurements on signals such as W-CDMA, WiMAX, LTE, and WLAN. The ML2430A series of power meters are designed for CW applications, offering a combination of accuracy, speed and flexibility in a low cost package. P/N: 11410-00423
This manual provides installation and operational information for the ML2437A and
ML2438A Power Meters. P/N: 10585-00001
This manual provides general information, performance verification, calibration, theory, and service information for the Anritsu ML2437A and ML2438A Power Meters. P/N: 10585-00003
This guide provides important notices, warranty, safety, and regulatory compliance information for the Anritsu Power Meters, Power Master™, USB Power Sensors, Thermal Sensors, and Diode Sensors. Be sure to
read these important notices before operating the equipment.
This manual provides descriptions and specifications for Anritsu Power Sensors that are used in conjunction with Anritsu power meters. It includes care, handling and performance verification information. P/N: 10585-00004
This user guide provides instructions on how to install firmware updates on the ML2400 Series Power Meters using the Anritsu Bootloader Software Utility.
Anritsu bootloader software utility
Bootloader cable (Anritsu part number B41323 – a 9 pin female to 9 pin female RS-232 cable, with TX & RX swapped, CTS & RTS swapped, and DTR & DSR swapped)
Anritsu ML2400 series power meter (ML2437A, ML2438A, ML2487A/B, ML2488A/B, ML2495A, or ML2496A)
The associated new firmware files
Intel-based PC with a Pentium or equivalent processor and the Microsoft® Windows® 2000, Windows XP, or the Windows 7 operating system (32- or 64-bit)
Both the Anritsu Bootloader software utility and power meter firmware can be downloaded from www.anritsu.com. These files will be under the Library tab on the associated product page under the Drivers, Software Downloads heading.
This manual provides installation, operation, and maintenance information for the Anritsu Model ML2419A Range Calibrator.
The ML2490A series has the performance required for narrow fast rising-edge pulse power measurements (e.g. radar). The ML2480B series is suited for wide-band power measurements on signals such as LTE, W-CDMA, WLAN, and WiMAX. The ML2430A series of power meters are designed for CW applications, offering a combination of accuracy, speed and flexibility in a low cost package.
With seven different families of power sensors to choose from, you can trust you’ll find the right combination for precision power measurement, whatever your application.
The Rack Mount Kit MT8852B can be ordered with rack mounting hardware that allows it to be mounted into a standard 48 cm equipment rack. P/N: 10585-00025
The aim of this guide is to familiarise you with the basic features and capabilities of the Anritsu ML2400A Series Power Meter by the use of working examples.
Quick Reference Guide
The Power Meter must be fitted with rack mount top and bottom covers at the factory. This procedure involves fitting support brackets, two front handles, and a rear support bracket. The two instruments that are bracketed together can then be secured in the rack position desired.