Skip to main content

Download Center

Search by product Model Number

By Document Type

VectorStar E and W Band Millimeter-Wave VNA System Quick Fact Sheet

The VectorStar E and W band mmWave system incorporates the high-performance, compact Anritsu mmWave modules in an economical extended E or W band configuration. P/N: 11410-00672

Brochure pdf 532.5 KB Version: H 06/11/2019

Combining On-Wafer Vector Network Analyzer and Spectrum Analyzer Measurements to 110 GHz Application Note

Performing on-wafer measurements presents a unique set of challenges. Achieving accurate on-wafer measurements requires careful planning of installation, calibration, and measurement configuration. Often, multiple parameters must be included in the overall analysis. This application note describes how S-parameters and spectrum analysis can be monitored simultaneously from 70 kHz to 110 GHz using a combination of the VectorStar ME7838A broadband system, the Spectrum Master MS2760A ultraportable spectrum analyzer, and the Anritsu MN25110A W1 coaxial precision directional coupler. P/N: 11410-01147

Application Note pdf 3.1 MB Version: A 05/11/2019

VectorStar ME7838A Series Technical Data Sheet

This document provides the specifications for the VectorStar. Broadband and mmWave configuration Vector Network Analyzers (VNAs) listed below, including all related options, and accessories. Alternative configurations available on request. P/N: 11410-00593

Datasheet pdf 7.0 MB Version: N 30/08/2019

VectorStar ME7838E Series Technical Data Sheet

This technical data sheet provides technical specifications for the VectorStar ME7838E Series Multiport Broadband Vector Network Analyzers. P/N: 11410-00767

Datasheet pdf 7.7 MB Version: J 30/08/2019

VectorStar ME7838D Series Technical Data Sheet

High Performance, Broadband Network Analysis Solutions, ME7838D Series Microwave Vector Network Analyzers Technical Data Sheet. P/N: 11410-00778

Datasheet pdf 5.8 MB Version: J 30/08/2019

VectorStar ME7838A Series Broadband/Millimeter-Wave System Quick Start Guide

This guide provides quick setup instructions for the ME7838A Broadband/Banded mm-Wave VNA System assembly. For additional safety and compliance information, and for more details about the assembly, configuration, setup, and initial testing of the equipment, refer to the VectorStar™ ME7838A Series Broadband Vector Network Analyzers Installation Guide. P/N: 10410-00292

Quick Start Guide pdf 2.3 MB Version: D 30/08/2019

VectorStar ME7838E 2-Port Broadband/Banded Millimeter-Wave System Quick Start Guide

This guide provides quick setup instructions for the ME7838E Broadband/Banded mm-Wave VNA System assembly. For additional safety and compliance information, and for more details about the assembly, configuration, setup, and test of the equipment, refer to the VectorStar ME7838 Series Broadband/Millimeter-Wave System Installation Guide. P/N: 10410-00729

Quick Start Guide pdf 2.3 MB Version: C 30/08/2019

VectorStar™ ME7838D 2-Port Broadband/Banded Millimeter-Wave System Quick Start Guide

This guide provides quick setup instructions for the ME7838D Broadband/Banded mm-Wave VNA System assembly. For additional safety and compliance information, and for more details about the assembly, configuration, setup, and test of the equipment, refer to the VectorStar ME7838 Series Broadband/Millimeter-Wave System Installation Guide. P/N: 10410-00732

Quick Start Guide pdf 2.4 MB Version: B 30/08/2019

VectorStar MS464xB Product Information, Compliance, and Safety

This guide provides warranty, safety and regulatory compliance information for the VectorStar Series VNA products. P/N: 10100-00063

Datasheet pdf 1.6 MB Version: E 29/08/2019

VectorStar Broadband/Banded Millimeter-Wave Module Reference Manual

This Reference Manual provides information about the VectorStar Broadband/Banded Millimeter-Wave Modules. These modules are used with the ME7838 Series VectorStar Broadband/Banded Millimeter-Wave VNA Systems. P/N: 10410-00311

Quick Reference Guide pdf 5.4 MB Version: E 29/08/2019

3656B W1 Calibration/Verification Kit and 2300-584-R System Performance Verification Software User Guide

This manual provides description and maintenance instructions for the Model 3656B W1 (1 mm) Calibration and Verification Kit and describes the use of the Anritsu 2300-584-R Performance Verification Software (PVS) for the VectorStar ME7838x and ME7838x4 Series. P/N: 10410-00286

User Guide pdf 17.7 MB Version: L 29/08/2019

3659 0.8 mm Calibration/Verification Kit and 2300-580-R System Performance Verification Software User Guide

This manual provides description and maintenance instructions for the Model 3659 0.8 mm Calibration and Verification Kit and describes the use of the Anritsu 2300-580-R Performance Verification Software (PVS) for the VectorStar ME7838D Modular BB/mm-Wave VNA Measurement System. P/N: 10410-00327

User Guide pdf 8.6 MB Version: C 29/08/2019

VectorStar ME7838A4 Multiport Broadband VNA Installation Guide

This manual provides instructions for setup and initial test of the VectorStar ME7838A4 Multiport Broadband/Banded Millimeter Wave Vector Network Analyzer (VNA) System. P/N: 10410-00734

Installation Guide pdf 8.0 MB Version: B 29/08/2019

Anritsu's RF and Microwave Test and Measurement Solutions Product Brochure

Overview of RF and Microwave instruments available to meet a variety of solutions. Featuring the frequency range, measurements, and other key features. P/N: 11410-00800

Brochure pdf 18.2 MB Version: M 27/08/2019

Configuring IC-CAP 2018 for VectorStar Operation

This document outlines the procedure for configuring the IC-CAP 2018 software to add a VectorStar system to the hardware instrument list. P/N: 11410-01136

Application Note pdf 116.0 KB Version: A 27/08/2019

EU Declaration of Conformity for VectorStar Broadband VNA

This Declaration of Conformity is a special document issued by Anritsu to state that the product meets all of the applicable legislation and European directives. P/N: 10101-00065

Datasheet pdf 107.3 KB Version: A 13/08/2019

Generating Eye Diagrams in VectorStar VNAs Including PAM-4

This important display allows design engineers to observe the likelihood of bit errors due to level compression, jitter, slew and edge distortion as well as other effects. P/N: 11410-00919

Application Note pdf 1.6 MB Version: B 21/06/2019

Precision RF & Microwave Components Catalog

Anritsu is the leader of high frequency microwave connector technology and is driven by an ongoing commitment to exceed customer needs. Anritsu created and trademarked the K Connector with coverage to 40 GHz, along with a complete family of 40 GHz test equipment. It was an immediate success and today is used on many commercial components, test fixtures, and defense systems. P/N: 11410-00235

Catalog pdf 12.3 MB Version: T 05/06/2019

Vector Network Analysis Product Portfolio

In 1965, Anritsu filed the patent that defined the first modern Vector Network Analyzer (VNA). We are proud to continue that tradition of innovation to the present day—with the world’s first portfolio of VNAs that bring Nonlinear Transmission Line (NLTL) technology to every measurement scenario from on-wafer device characterization to R&D testing to manufacturing and field operations. P/N: 11410-00905

Brochure pdf 7.3 MB Version: E 07/05/2019

0.8 mm Connectors Enable D-Band Coaxial Measurements Article

This article discusses the need for higher performance connectors to meet the needs of systems that are not only moving up in frequency but bandwidth and data transfer rates as well. P/N: 11410-01126

Articles pdf 2.2 MB Version: A 16/04/2019

By Document Type

MS4640B VectorStar Application (Software and DSP Firmware)

Unzip the downloaded file into a flash drive. Important: New software installation instructions are included. Please be sure to read the "VectorStar How To Install" document before installing.

Drivers, Software Downloads zip 513.7 MB Version: 2019.9.1 08/10/2019

VectorStar Application Installation

This version of software (and any other software version 2.1.0 and later, including those of format V201x.x.x) requires installation of Bittware 8.33 on the VNA prior to installation of the VectorStar application. Installation of Bittware is only needed once and does not need to be reinstalled at every VectorStar application installation. Please refer to Appendix A in this document for details about Bittware versions and installation of this driver.

Drivers, Software Downloads pdf 107.7 KB Version: 2019.9.1 08/10/2019

CapVNA for VectorStar VNA

CAPVNA is a Windows program to capture, display, save and print the graphical and textual data from VectorStar VNAs. The displayed data can be loaded from a flash drive where it was previously saved at the VNA or captured directly from the VNA over the GPIB port. The displayed data can be saved in a variety of formats to the PC's internal disk drive or a network drive and printed to a local or network printer(including color).

Drivers, Software Downloads exe 3.6 MB Version: 1.0.1 18/09/2017

VectorStar MS4640B Download WannaCry Security Patch

Security patch for the MS4640B Series VectorStar Vector Network Analyzers.

Drivers, Software Downloads zip 19.9 MB Version: 1.0 03/08/2017

Exact Uncertainty Calculator

This software can be used to calculate and plot Transmission and Reflection, Magnitude and Phase, measurement uncertainty, for VectorStar and ShockLine and family VNAs. It takes into consideration different calibration methods and kits, different conditions such as IF BW, and non-zero s11, s22, and s21, s12 conditions for transmission and reflection uncertainties respectively.

Drivers, Software Downloads exe 748.2 KB Version: 2.04 24/04/2017

Windows GPIB (Version 3.79)

WindowsGPIB is a Windows®-based program that sends and receives program data over GPIB, in response to commands entered from the keyboard or from a command file, similar but friendlier than NI's WIBIC. It is a good tool for testing mnemonics and commands while developing ATE programs. Windows GPIB supports only NI GPIB.

Drivers, Software Downloads exe 4.1 MB Version: 3.79 10/01/2017

Noise Figure Uncertainty Calculator

The VectorStar Noise Figure Uncertainty Calculator is a standalone program used to provide the user a tool for easily determining measurement uncertainty while using the VectorStar VNA Option 041 – Noise Figure. The calculator can be installed on the VectorStar instrument desktop or on a Windows XP/Windows 7 PC. Installation Instructions: Unzip the folder NoiseFigureUncertaintyCalculatorInstaller.zip If running, close the VectorStar application. Run setup.exe and follow the instructions. If the installation requests a reboot, please reboot. Notes: The VectorStar application may start after a reboot. If the Uncertainty Calculator installation was not completed, please close the VectorStar application. Installation instructions may not be visible with the VectorStar application running. A desktop shortcut is not automatically created during installation.

Drivers, Software Downloads exe 78.8 MB Version: 1.0.1 10/01/2017

By Product Category

No Records Found
Confirm your country below to see local events, contact information and special offers.