Skip to main content
mp1900a-signalqualityanalyzer

Signal Quality Analyzer-R

MP1900A
MP1900A series is an 8-slot modular, high-performance BERT supporting all-in-one Physical layer measurements of both high-speed network interfaces as NRZ and PAM4, and PCI Express/USB, bus interfaces
Overview

Featured Content: FEC Test Application Note

To cope with increasing data traffic caused by the widespread popularity of smartphones and mobile terminals, data-center network interfaces are being transitioned to the faster 200 GbE/400 GbE/800 GbE standards, while communications-equipment interconnects are adopting PCI Express Gen5 supporting faster speeds of 32 Gbit/s; multi-channel technologies are also being deployed.
Anritsu’s Signal Quality Analyzer-R MP1900A series is a high-performance BERT with 8 slots for modules, such as PPG, ED and Jitter/Noise Generator, to expand measurement applications supporting signal integrity analyses of ever-faster devices. In addition to Physical layer measurement functions for broadband network interfaces, the all-in-one MP1900A supports PCI Express bus, etc., interface measurements.

Target Applications
100 GbE/200 GbE/400 GbE/800 GbE, CEI-25G/28G/56G/112G, InfiniBand EDR/HDR, Fibre Channel, PCI Express Gen1/2/3/4/5, Thunderbolt 1/2/3, USB3.2/4 Type C, SAS-3/-4, DP1.4, Optical module, SERDES, AOC, High-speed Interconnect

Anritsu MP1900A BERT for Ethernet and PCI Express of data-center
PAM4 Test Solution
  • 512 Gbit/s max. transmission capacity
  • PAM4 PPG/ED (MU196020A/MU196040A)
    Baud rate of 2.4 to 64.2 Gbaud*1
    Multichannel Scalability 4ch PAM4/NRZ  NEW
    High-speed Tr/Tf of 8.5 ps (20 to 80%)
    Low Intrinsic Jitter output of random Jitter 170 fs rms (typ.)
    Low noise and low distortion high-quality data output
    4Tap Emphasis (20-dB Range)
    ISI adjustment function  NEW
    FEC pattern generation  NEW
    Stressed margin BER < E-12*2
    Built-in Clock Recovery
    PAM4 pattern editor and symbol error measurement
  • Jitter Addition, Jitter Tolerance measurement functions (SJ/RJ/BUJ/SSC)
  • Voltage Noise Addition function (Common/Differential/White Noise)
  • Jitter Tolerance measurement using DUT BER counter function  NEW
*1: Future support for ED (Over 32.1G)
*2: At PAM4 Stressed waveform input refer to CEI
PAM4 Solution (Max. 64 Gbaud at 1CH)
PAM4 Solution (Max. 64 Gbaud at 1CH)
High-Speed Serial BUS Test Solution (PCI Express, USB, Thunderbolt)
  • 512 Gbit/s max. transmission capacity, one main frame expandable to 16ch (filling 8 slots with 32 Gbit/s 2 ch PPG)
  • All-in-one support for both high-speed Ethernet and PCI Express interface tests
  • New wideband 32 Gbit/s SI PPG/ED (MU195020A/MU195040A)
    • Bit rate of 2.4 Gbit/s to 32.1 Gbit/s
    • NRZ/PAM4 Support
    • 10Tap Emphasis
    • Variable ISI function
    • Multi-band CTLE (8 Gbit/s, 16 Gbit/s, 28 Gbit/s bandwidths)
    • Low Intrinsic Jitter output of random Jitter 115 fs rms (typ.)
    • High-sensitivity Data input of 15 mV typ. (EYE Height)
    • 1ch/2ch Selection
  • PCI Express Link Training, LTSSM analysis (using MU195020A/MU195040A/MX183000A-PL021)
  • USB Express Link Training, LTSSM analysis (using MU195020A/MU195040A/MX183000A-PL022)
  • Jitter Addition, Jitter Tolerance measurement functions (SJ/RJ/BUJ/SSC, using MU181500B/MX183000A-PL001)
  • Voltage Noise Addition function (Common/Differential/White Noise, using MU195020A/MU195050A)
NRZ Solution (Max. 32 Gbit/s at 1ch)
NRZ Solution (Max. 32 Gbit/s at 1ch)
Specifications

downloadView Data Sheet  UPDATED

Typical Specifications

  • Signal Quality Analyzer-R MP1900A
Item Specification
LCD 12.1-inch, WXGA 1280 x 800
Remote Interface GPIB, LAN
Module Slots 8
External Peripheral I/F USB x6, VGA x1, HDMI x1
OS Windows Embedded Standard 7
Power 100V(ac) to 120V(ac)/200V(ac) to 240 V(ac)
50 Hz to60 Hz
Power Consumption 1350 VA max.
Dimensions/Mass 340 (W) x 222.5 (H) x 451 (D) mm/20 kg max. (excluding modules)
  • Noise Generator MU195050A
Item Specification
No. of Channels 2
Insertion Loss -3 dB
CMI 0.1 GHz to 1 GHz/1 GHz to 6 GHz
DMI 2 GHz to 10 GHz
White Noise 10 MHz to 10 GHz
Crest Factor >5
  • PAM4 PPG MU196020A
Item Specification
Operation Rate (PAM4/NRZ) 2.4 Gbaud to 32.1/58.2/64.2 Gbaud (option selection)
No. of Channels 1
Output Amplitude 70 mVp- to 800 mVp-p (Single-end)
140 mVp- to 1600 mVp-p (Differential)
Offset -2 V to +3.3 V
Emphasis 4 Tap, -20 to +20 dB
Channel Emulator Generates waveform with insertion loss and simulates waveform with corrected insertion loss
Set by loading S-Parameter file (S2 P, S4 P)
ISI Simulates ISI generation waveform
Set using loss (–8.00 to 8.00 dB) at CEI-specified Nyquist frequency
Used in combination with channel board, such as J1800A/J1758A (optional accessories parts), or Noise Module MU195050A
Independently Variable PAM4 3 Eye 20 to 50% (PAM4 Amplitude 0/3 level = 100%)
PAM4 Pattern SSPRQ, PRBS13Q, PRBS31Q, RS-FEC, etc.
PAM4 Pattern Error Addition MSB Error, LSB Error, LSB&MSB Error, RS-FEC Symbol Error
Tr/Tf (20 to 80%) 8.5 ps (typ., NRZ)
Random Jitter 170 fs rms (typ., NRZ)
I/O Connector V (f)
  • PAM4 ED MU196040B  NEW
Item Specification
Operation Rates (PAM/NRZ) 2.4 to either 32.1 Gbaud, or 58.2 (PAM4)/64.2 (NRZ) Gbaud (option selection)
No. of Channels 1
Input Amplitude NRZ: ≤32.1G: 0.05 to 1.0 Vp-p; >32.1G: 0.1 to 1.0 Vp-p
PAM4: ≤32.1G: 0.3 to 1.0 Vp-p; >32.1G: 0.4 to 1.0 Vp-p
Input Sensitivity (Eye Height) NRZ: 19 mV @ 26.5625 Gbaud; 21 mV @ 53.125 Gbaud
PAM4: 23 mV @ 26.5625 Gbaud; 36 mV @ 53.125 Gbaud
Clock Recovery (Option) 2.4 to 32.1 Gbaud; 51 to 58.2 Gbaud
Equalizer (Option) Low-frequency Equalizer (≤1 GHz, 2 dB typ.) + DFE (1.4 dB typ.)
PAM4 Patterns SSPRQ, PRBS13Q, PRBS31Q, etc.
PAM4 Counter MSB, LSB, Symbol 0 to 3 (Option)
Input Connector V (f)
  • 21G/32G bit/s SI PPG MU195020A
Item Specification
Operation Bit Rate (NRZ) 2.4 Gbit/s to 21 Gbit/s or 32.1 Gbit/s
No. of Channels 1 or 2
Output Amplitude 0.1 Vp-p to 1.3 Vp-p (Single-end)
0.2 Vp-p to 2.6 Vp-p (Differential)
Emphasis 10Tap
Channel Emulator Normal: Emulates Insertion Loss using S-parameters
Inverse: Performs De-Emphasis compensation for S-parameter Insertion Loss
S-Parameter file: S2P,S4P
ISI Emulates output for ISI using CEI-28G/25G Nyquist frequency loss setting
Supports loss control in combination with J1758A ISI Board accessory
Insertion Loss setting:1.5 to 25 dB, 0.01 dB step, Nyquist frequency
0 to 25 dB, 0.01 dB step, 1/2 Nyquist frequency
Tr/Tf (20% – 80%) 12 ps (typ.)
Random Jitter 115 fs rms (typ.)
PCIe and USB Link Training Supported(MX183000A-PL021/PL022/PL025)
Output Connector K (f)
  • 21G/32G bit/s SI ED MU195040A
Item Specification
Operation Bit Rate (NRZ) 2.4 Gbit/s to 21 Gbit/s or 32.1 Gbit/s
No. of Channels 1 or 2
Input Amplitude 0.05 Vp-p to 1.0 Vp-p (Single-End)
0.1 Vp-p to 2.0 Vp-p (Differential)
Input Sensitivity (Eye Height) 15 mV (Eye Height 28.1 Gbit/s)
30 mV/Eye(28.1 Gbaud, PRBS15, PAM4)
CTLE Peak Frequency 14, 8, 4 GHz
Gain 0 to –12 dB
Clock Recovery Yes, SSC support
PCIe and USB Link Training Supported(MX183000A-PL021/PL022/PL025)
Ouput Connector K (f)

Modules for the MP1800A series can be used in the MP1900A. Refer to the selection guide for more details.

Applications

The MP1900A provides solutions for:

Tektronix and Anritsu Solution
PCI Express 5.0 Test System (NEW)

High Speed PAM4 BER Measurement Solution

PCIe, USB, Thunderbolt Receiver Test Solution
All-in-One PCIe Gen1 to Gen5 Support

Teledyne LeCroy and Anritsu Solution
PCI Express and Type-C Interface Test System

Library
VIDEOS
Related Product
Confirm your country below to see local events, contact information and special offers.