Skip to main content
X線検査機 ドライ商品専用モデル fシリーズ - X-ray Inspection System Economy KD74-f series

X-ray Inspection System

Entry [KD74-f series]
This product has been discontinued
Anritsu X-ray Inspection System [KD74-f series] is designed for dry products. With low X-ray output and simple construction, this model is suitable for dry products such as snacks.

With low X-ray output and simple construction, this series are suitable for dry products.

  • For dry products only
  • Protection class: IP40
  • X-ray output: Low power (max.100W)
  • System range: For small packaged products / For lightweight products / Long conveyor type
Detection Areas

A variety of models is available for a wide range of products. For details of detection areas, please submit an online inquiry form.

Detection area
検査可能範囲 - Detection Areas
For Packaged Products

検査可能範囲 - Detection Areas
For Lightweight Products

and Those in Small Bags

External Dimensions

[Example model] Maximum width: 390 mm, Maximum height: 150 mm (KD7405KP)

External Dimensions
Detection sensitivity 1
Fe sphere and SUS sphere 0.3 mm dia., SUS wire 0.2 mm dia.× 2 mm long
X-ray output
Tube voltage 25 to 50 kV, tube current 0.3 to 4.0 mA, output 7.5 to 100 W
X-ray leakage maximum 1μSv/h or less, prevention of x-ray leakage by safety devices
15-inch color TFT LCD (unified image monitoring screen and operation screen)
Operation method
Touch panel (with touch buzzer)
Product size 2, 3
Maximum width 240 mm, maximum height 120 mm
Belt width
270 mm
Masking function
Equipped as standard
Missing product detection function
Equipped as standard
Clip check function
Equipped as standard
Preset memory
Maximum 100
Belt speed 4 /Maximum product weight 5
5 to 60 m/min, maximum 3 kg
61 to 80 m/min, maximum 2 kg
5 to 35 m/min, maximum 6 kg (optional)
Power requirements 6, 7, 8
100 to 120 or 200 to 240 Vac, single phase, 50/60 Hz, 700 VA, rush current 80 A (typ.) (5 ms or less)
200 kg
Environmental conditions 9
Temperature: 0º to 35ºC (0º to 40ºC with optional air conditioner), relative humidity: 30% to 85%, non-condensing
1: Actual sensitivity depends on the physical properties of products (contents and shape) and on the environmental conditions. 2: The detection area is shown above. 3: The entrance and exit may require covers depending on the length of a product. 4: Variable depending on Product No. 5: Sum total of product weight on the conveyor. 6: Selectable by switching terminals. Note that the rush current shown above is at an AC voltage of 200 V. It varies according to voltage. 7: Allowable power fluctuation range is ± 10%. 8: Installing the air-conditioner option changes the displayed power consumption. 9: The air-conditioner option may be required depending on the operating environment. Note: The noise level of x-ray inspection systems is 72 dB(A).
Related Product