Skip to main content

Download Center

Search by product Model Number

By Document Type

Anritsu's RF and Microwave Test and Measurement Solutions Product Brochure

Overview of RF and Microwave instruments available to meet a variety of solutions. Featuring the frequency range, measurements, and other key features. P/N: 11410-00800

Brochure pdf 18.2 MB Version: M 27/08/2019

ShockLine Economy VNA MS46322B Technical Data Sheet

The MS46322B is part of the ShockLine family of Vector Network Analyzers from Anritsu. It is a low-cost series of 2U high, 2-port Economy Vector Network Analyzers. It is available in three frequency ranges. P/N: 11410-00996

Datasheet pdf 3.6 MB Version: L 31/07/2019

ShockLine MS46xxxA/B and MS4652xB VNA Programming Manual

ShockLine VNAs supports remote operations commanded via the TCP/IP or VXI-11 protocols. This manual provides operation and programming information for this activity. P/N: 10410-00746

Programming Manual pdf 17.7 MB Version: T 31/07/2019

ShockLine MS46322A and MS46322B Series Operation Manual

Operation manual for the MS46322A and MS46322B Vector Network Analyzers. P/N: 10410-00335

Operations Manual pdf 9.6 MB Version: T 31/07/2019

ShockLine MS46121A/B, MS46122A/B, MS46322A/B User Interface Reference Manual

This manual is a reference document for the Anritsu ShockLine VNA user interface (UI) menus and dialog boxes. This chapter describes the document conventions used in this manual and lists related ShockLine VNA documentation. P/N: 10410-00337

User Guide pdf 32.1 MB Version: AA 31/07/2019

ShockLine MS46122A/B and MS46322A/B Calibration and Measurement Guide

The purpose of this Measurement Guide is to introduce the basic calibration and operation of the ShockLine MS46122A/B and MS46322A/B Series Vector Network Analyzer (VNA) and reduce the time required to become proficient at performing basic measurements. P/N: 10410-00336

Measurement Guide pdf 19.5 MB Version: N 31/07/2019

VNA Fundamentals Poster

This poster features sections on Circuits and Waves, S-Parameters, Reflection Coefficient, Phase and Group Delay, Non Linear Transmission Lines, VNA Architecture, Superposition/True Mode Stimulus, Time Domain, Pulse Measurements, and a Reflection Coefficient Table. P/N: 11410-00934

Brochure pdf 13.4 MB Version: C 23/07/2019

ShockLine™ Vector Network Analyzer Maintenance Manual, MS46322A, MS46322B

This manual provides service and maintenance information for the Anritsu ShockLine MS46322A/B Vector Network Analyzer. The information includes product description, performance verification procedures, parts removal and replacement procedures, and troubleshooting information. P/N: 10410-00342

Maintenance Manual pdf 5.4 MB Version: E 17/07/2019

5G Solutions Catalog 2019 Vol. 2

Introduces Anritsu 5G solutions and products. Anritsu will contribute to customer's 5G product development and future innovation of network.

Brochure pdf 3.1 MB 17/07/2019

Precision RF & Microwave Components Catalog

Anritsu is the leader of high frequency microwave connector technology and is driven by an ongoing commitment to exceed customer needs. Anritsu created and trademarked the K Connector with coverage to 40 GHz, along with a complete family of 40 GHz test equipment. It was an immediate success and today is used on many commercial components, test fixtures, and defense systems. P/N: 11410-00235

Catalog pdf 12.3 MB Version: T 5/06/2019

ShockLine Economy VNA MS46322B Quick Fact Sheet

The MS46322B is an Economy ShockLine Vector Network Analyzer, with a frequency range from 1 MHz to 43.5 GHz. P/N: 11410-01014

Brochure pdf 632.1 KB Version: B 4/06/2019

ShockLine Vector Network Analyzer Family Product Brochure

The ShockLine family of vector network analyzers (VNAs) achieve a new level of capability, flexibility, and value for RF and microwave network analysis applications. ShockLine VNAs deliver excellent performance for measurements from 50 kHz up to 43.5 GHz and banded E-band measurements from 55 GHz to 92 GHz. These instruments are ideal for testing passive and many active components with general purpose VNA requirements. P/N: 11410-01071

Brochure pdf 2.2 MB Version: H 4/06/2019

ShockLine Vector Network Analyzers Selection Guide

Anritsu's ShockLine Family of Vector Network Analyzers are a series of five VNA models (with 15 products to choose from) that provide a broad range of solutions to meet your unique performance, application, and budget needs. P/N: 11410-01039

Selection Guide pdf 2.1 MB Version: D 7/05/2019

Vector Network Analysis Product Portfolio

In 1965, Anritsu filed the patent that defined the first modern Vector Network Analyzer (VNA). We are proud to continue that tradition of innovation to the present day—with the world’s first portfolio of VNAs that bring Nonlinear Transmission Line (NLTL) technology to every measurement scenario from on-wafer device characterization to R&D testing to manufacturing and field operations. P/N: 11410-00905

Brochure pdf 7.3 MB Version: E 7/05/2019

Compact ShockLine VNA Declaration of Conformity

The Compact ShockLine VNA Declaration of Conformity is a special document issued by Anritsu to state that the product meets all of the applicable legislation and European directives. P/N: 10101-00042

Datasheet pdf 97.6 KB Version: B 10/04/2019

ShockLine Series Vector Network Analyzers Verification Kits and Performance Verification Software

This quick start guide provides a brief overview of the installation and use of ShockLine Verification Kits and the 3-2300-610 Performance Verification Software (PVS) with ShockLine Series VNAs. P/N: 10410-00766

Quick Start Guide pdf 2.8 MB Version: B 9/04/2019

Distinction Between TRL and LRL

Although the TRL family of calibration algorithms have been around for over 40 years, there are still questions sometimes regarding differences between the family members. This is partially due to differences in various implementations over the years. The purpose of this document is to discuss some of the differences in the context of vector network analyzers (VNAs). P/N: 11410-01124

Application Note pdf 271.3 KB Version: A 26/03/2019

Technique for Improving Low Insertion Loss VNA Measurements Application Note

Vector network analyzers (VNAs) are used to measure the performance of a wide variety of passive and active RF and microwave devices. Passive devices can be less demanding to test than active devices, thus requiring less performance from the VNA. However, one interesting exception to this is the measurement of very low insertion loss passive components such as precision adapters or airlines. These types of devices can present a difficult challenge to characterize because of the desire for very low uncertainties on these small insertion losses. This application note talks about these challenges and provides a helpful technique. P/N: 11410-01090

Application Note pdf 975.1 KB Version: A 25/09/2018

Superposition vs. True-Balanced: What's Required for your Signal Integrity Application White Paper

The superposition technique relies on the inherent linear nature of a transmission line, and mathematically derives the differential and common-mode transmission line characteristics through superposition while stimulating just one side of the balanced transmission line at a time. The true-balanced/differential technique, also known as True-Mode Stimulus, uses two sources to create actual differential and common-mode stimuli. This white paper offers guidance to signal integrity designers on the differences between these approaches and which one may best fit their need. P/N: 11410-00659

White Paper pdf 314.3 KB Version: D 23/08/2018

Electrical-to-Optical and Optical-to-Electrical (E/O and O/E) converter measurements

As fiber and free-space optical communication bandwidths increase, the need for very high speed optical modulators and detectors has also increased. The frequency response characterization of these electrical-to optical (E/O, modulators sometimes integrated with lasers) and optical-to-electrical (O/E, photo detectors and receivers) converters can be important in terms of such parameters as bandwidth, flatness, phase linearity and group delay.

Application Note pdf 5.8 MB Version: D 6/02/2018

By Document Type

IVI-C Installation Files

IVI-C installer for Windows 7, 8 and 10 operating systems. Compatible with ShockLine software.

Drivers, Software Downloads exe 100.2 MB Version: v2019.7.1 22/07/2019

Software Release Note for the ShockLine VNAs

Software release note for the MS46121B, MS46122B, MS46322B, MS46522B, and MS46524B ShockLine family of Vector Network Analyzers.

Drivers, Software Downloads pdf 127.5 KB Version: v2019.7.1 22/07/2019

ShockLine VNA Software

Download the latest software for the ShockLine VNA family. This software works with the B series: MS46121B, MS46122B, MS46322B, MS46522B and MS46524B, and the A series: MS46121A, MS46122A, MS46322A. Note: This installation may require your host to be re-booted to support updates to existing drivers. This installation will require the insertion of services and drivers to your host. Please turn off all Web and Host Virus Detection Applications before starting the installation. Upon completion of the installation turn on your virus Detection Applications to their previous state.

Drivers, Software Downloads exe 234.9 MB Version: v2019.7.1 22/07/2019

Release Note for IVI-C Driver

Release history for the IVI-C installer for Windows 7, 8 and 10 operating systems. Compatible with ShockLine software.

Drivers, Software Downloads pdf 148.7 KB Version: v2019.7.1 22/07/2019

Exact Uncertainty Calculator

This software can be used to calculate and plot Transmission and Reflection, Magnitude and Phase, measurement uncertainty, for VectorStar and ShockLine and family VNAs. It takes into consideration different calibration methods and kits, different conditions such as IF BW, and non-zero s11, s22, and s21, s12 conditions for transmission and reflection uncertainties respectively.

Drivers, Software Downloads exe 748.2 KB Version: 2.04 24/04/2017

Cal Kit File Maker

The Cal Kit File Maker program provides all the files necessary to create a calibration kit file for the VectorStar, Lightning and ShockLine VNAs. The program provides a convenient set of menus for entering the required information for the different standards in the calibration kit. The program does not perform calculations, it takes the input provided and creates files in the appropriate format.

Drivers, Software Downloads zip 4.5 MB Version: 2.02 26/04/2016

CapVNA for ShockLine VNAs

CAPVNA is a Windows program to capture, display, save and print the graphical and textual data from ShockLine VNAs. The displayed data can be loaded from a flash drive where it was previously saved at the VNA or captured directly from the VNA. The displayed data can be saved in a variety of formats to the PC's internal disk drive or a network drive and printed to a local or network printer (including color).

Drivers, Software Downloads exe 519.3 KB Version: 2.6.9.6 29/09/2015

By Product Category

No Records Found
Confirm your country below to see local events, contact information and special offers.