The Spectrum Master MS2711E User Guide is part of a set of manuals that cover all of the
instrument functions and their use. This manual covers the instrument overview, system
functions, and other common features, along with a brief guide to basic measurement
concepts and setups. P/N: 10580-00328
Technical Data Sheet for the 9 kHz to 3 GHz Spectrum Master compact handheld spectrum analyzer. P/N: 11410-00597
This Measurement Guide describes Electromagnetic Field (EMF) measurement functions available as Option 444 on Anritsu RF and Microwave Handheld Instruments. Option 444 must be used in conjunction with an Anritsu isotropic antenna, at a frequency range that is within specification of the instrument and antenna used. P/N: 10580-00455
Anritsu is the leader of high frequency microwave connector technology and is driven by an ongoing commitment to exceed customer needs. Anritsu created and trademarked the K Connector with coverage to 40 GHz, along with a complete family of 40 GHz test equipment. It was an immediate success and today is used on many commercial components, test fixtures, and
defense systems. P/N: 11410-00235
This SCPI Programming Manual provides information for remote operation of the following Anritsu instruments using commands sent from an external controller via Ethernet or USB connection: S331E, S332E, S361E, S362E Site Master, MS2711E, MS2712E, MS2713E Spectrum Master, and MT8212E, MT8213E Cell Master. P/N: 10580-00256
Compare the features and options available on a variety of handheld analyzers. Select the right solution to get the job done. P/N: 11410-00309
The Spectrum Master MS2711E has been designed for technicians, installers, field radio frequency (RF) engineers, and contractors who struggle with both keeping track of the growing number of interfering signals and assessing signal quality on a wide range of increasingly complex signals. P/N: 11410-00607
Poster showcasing the RF and Microwave Handheld analyzers options. Features Cable and Antenna Analyzers, Base Station Analyzers, Spectrum Analyzers, Vector Network Analyzers, and PIM Analyzers. P/N: 11410-00571
This Measurement Guide describes the test and measurement functions of Anritsu RF and
Microwave Handheld Instruments. Basic spectrum analyzer functions are included with most
Anritsu handheld instruments.
This Quick Fact Sheet covers the key applications, key specifications, accessories and options available for the Spectrum Analyzer MS2711E.
A small 2 page flyer to showcase the right tools needed to achieve best in class network reliability.
This solution brochure covers the four steps to success when interference hunting, as well as which Anritsu product/solution is suitable for each step in the process.
This guide provides important notices, warranty, safety, and regulatory compliance information for the MS2711E Spectrum Analyzer. Be sure to read these important notices before operating the equipment.
Online Help System
This guide provides important notices, warranty, safety, and regulatory compliance information for Anritsu RF and microwave handheld analyzers. Be sure to read these important notices before operating the
This manual provides maintenance instructions for Anritsu Spectrum Master Models MS2711E, MS2712E and MS2713E.
The Spectrum Master Declaration of Conformity is a special document issued by Anritsu to state that the product meets all of the applicable legislation and European directives. P/N: 10101-00038
Anritsu’s Electromagnetic Field (EMF) Measurement System is designed to measure radiation compliance with various national standards for personal safety set by governmental regulatory authorities. Many countries have mandated EMF safety testing in areas where cellular or other high power transmission antennas are located. The EMF option is primarily targeted to both cellular operators and government regulators. Additionally, contractors and small service companies perform building inspections and field surveys to monitor radiation exposure intensities in areas situated near transmission antennas.
Anritsu’s EMF Measurement System is designed to be easy to use, while providing the user with numerous automated features which will enable them to do their job quickly and more efficiently. Electromagnetic field measurements (EMF, Option 0444) are available on the following Anritsu products: MS2711E, MS2712E, MS2713E, MS2720T, MT8212E, MT8213E and S412E. Firmware version 1.56 or later is required (v1.12 for MS2720T).
EMF Option (0444) provides the capability to measure electromagnetic field radiation when used in conjunction with an Anritsu isotropic antenna. Automated measurements can be taken using user-definable time intervals.
The first indicators of interference are noisy links, for analog systems. Legacy AM and FM systems indicate
interference problems by various noises. Hiss, hum, or even voices from other transmissions can be heard.
For digital transmissions, such as HDTV, cellular, or P25, interference shows up as limited range, dropped
calls, or low data rate. That familiar waterfall sound on your cellular phone indicates poor reception and a
high bit error rate, which might be caused by interference. P/N: 11410-00972
This paper covers how to use the MA2700A Handheld InterferenceHunter to locate interference through direction finding. The process of creating maps for the spectrum analyzer, selecting antennas and pre-filters, where to start looking for the interference, spectrum analyzer setup, taking bearings, and interpreting the results is explained. In addition, “last block” strategies for finding signals once we know we are close to the source is discussed.
Discover Anritsu's best-in-class tools which will help your technicians and engineers optimize all areas of your network and elevate your network reliability to best-in-class.