Skip to main content

Download Center

Search by product Model Number

By Document Type

Vector Network Analyzer 2300-480 Performance Verification Software User Guide

This manual supports the Anritsu 37000 Series VNA System Performance Verification Software, GPRG# 63420. This software is used with the Anritsu 37000 Series Vector Network Analyzers.

User Guide pdf 697.0 KB Version: B 19/07/2011

Lightning 37000D Series Maintenance Manual

This manual provides general service and preventive maintenance information for the Anritsu 37XXXD models of Vector Network Analyzer (VNA) systems.

Maintenance Manual pdf 996.7 KB Version: C 2/07/2007

Vector Network Analyzer 37000D Technical Datasheet and Configuration Guide

Support documentation for Lightning Network Analysis Solutions for Design and Manufacturing. P/N: 11410-00350

Datasheet pdf 399.8 KB Version: C 29/03/2007

AutoCal 36581NNF/81KKF/82KKF User's Guide

User guide for the Automatic VNA Calibrators 36581NNF, 36581KKF, and 36582KKF. This manual describes (1) the physical requirements, including test hardware, software, and computer resources necessary to setup a measurement and (2) how to start and use the software to control the calibration.

User Guide pdf 223.9 KB Version: E 26/03/2007

Lightning 37000D Series Operation Manual

This manual provides general information, installation, and operating information for the Model 37XXXD Vector Network Analyzer (VNA) system.

Operations Manual pdf 4.3 MB Version: B 2/02/2007

Lightning 37000D Series GPIB Quick Reference Guide

This appendix provides a quick reference to the 37XXXD GPIB Programming commands.

Programming Manual pdf 351.6 KB Version: A 2/09/2004

Lightning 37000D Series Programming Manual

This manual provides IEEE 488 bus (GPIB) programming information and data for all models of the Series 37000C Vector Network Analyzer. It contains the entire command set for programming all features. Consequently, not all of the codes documented in this manual apply to all models within the series (372XXD, 373XXD).

Programming Manual pdf 2.4 MB Version: A 2/09/2004

Lightning 372XXC/373XXC Maintenance Manual

This manual provides general service and preventive maintenance information for the Anritsu 372XXC/373XXC models of Vector Network Analyzer (VNA) systems.

Maintenance Manual pdf 1.8 MB Version: D 19/08/2004

Multiport Lightning SM5962/75 Technical Data Sheet

Technical Data Sheet for the Microwave Multiport Balanced VNA.

Datasheet pdf 229.5 KB Version: A 14/07/2004

373XXA Vector Network Analyzer Series Maintenance Manual

373XXA Vector Network Analyzer.

Maintenance Manual pdf 1.5 MB 23/03/2004

Lightning 37XXXC GPIB Quick Reference Guide

This appendix provides a quick reference to the 37XXXC GPIB Programming commands.

Programming Manual pdf 274.3 KB Version: D 19/03/2004

Lightning 37XXXC Operation Manual

This manual provides general information, installation, and operating information for the Model 37XXXC Vector Network Analyzer (VNA) system. (Throughout this manual, the terms VNA, 37XXXC VNA, and 37XXXC will be used interchangeably to refer to the system.) It also provides description and instructions for the Millimeter Wave System that can be added to the 371XXC.

Operations Manual pdf 6.1 MB Version: E 1/03/2004

Vector Network Analyzer 371XXC Maintenance Manual

This manual provides general service and preventive maintenance information for the ANRITSU 371XXC family of Vector Network Analyzer (VNA) systems.

Maintenance Manual pdf 2.6 MB Version: B 14/09/2002

AutoCal 2-Port Automatic Calibrators 3658x Technical Data Sheet

The 3658x series AutoCal modules are automatic calibrators that provide fast, repeatable, and high-quality coaxial calibrations up to 40 GHz. These modules contain precisely characterized calibration standards that aid in the removal of normal systematic errors of Vector Network Analyzers.

Datasheet pdf 242.8 KB Version: C 20/08/2002

Vector Network Analyzer 372xxB Maintenance Manual

This manual provides general service and preventive maintenance information for the Anritsu 372xxB family of Vector Network Analyzer (VNA) systems.

Maintenance Manual pdf 1.6 MB Version: D 23/06/2000

Power Tools and Utilities 2300-218 Software User's Guide

Power Tools includes a hypertext help file that explains functions and their required parameters in detail. A good starting point for first time users.

User Guide pdf 30.2 KB Version: A 14/03/2000

Vector Network Analyzer 371xxA Maintenance Manual

This manual provides general service and preventive maintenance information for the Anritsu 371XXA family of Vector Network Analyzer (VNA) systems.

Maintenance Manual pdf 1.9 MB Version: D 23/07/1999

Vector Network Analyzer 372xxA Maintenance Manual

This manual provides general service and preventive maintenance information for the Anritsu 372XXA family of Vector Network Analyzer (VNA) systems.

Maintenance Manual pdf 2.8 MB Version: B 23/07/1996

By Document Type

Lightning Navigator™ Multi-Port Software

Download Instructions
— Click on Download
— Run the executable file and it will guide you through the rest of the installation.

Supported VNAs: Lightning 37000D/E series

Drivers, Software Downloads exe 19.0 MB Version: 5.17 18/09/2017

VNA FTP Utility version 1.27

VNA FTP displays the VNA's Hard and Floppy drives alongside the PC's drives, similar to Windows Explorer. This permits moving, copying and deleting files within and between the two entities with a few mouse clicks. Download and Install Instructions: Download the file below and save it to your PC's hard drive. Unzip the file. Run the setup.exe file to begin the installation process.

Drivers, Software Downloads exe 4.3 MB Version: 1.27 10/01/2017

Capture VNA version 2.45

Capture VNA is a Windows program to capture, display, save, and print the graphical and text data from Anritsu's VNAs. The displayed data can be loaded from a floppy disk where it was previously saved at the VNA or captured directly from the VNA over the GPIB port. The displayed data can be saved in a variety of formats (bitmap, S2p, text, etc.) to the PC's internal disk drive or a network drive and printed to a local or network printer (including color). The data can also be copied to the Windows Clipboard to be imported into other Windows programs such as MS Word, Excel, Power Point, Photo Editor, Paint or Notepad. Download and Install Instructions: Download the file below and save it to your PC's hard drive. Unzip the file. Run the setup.exe file to begin the installation process.

Drivers, Software Downloads zip 2.7 MB Version: v2.6.9 14/01/2014

Windows GPIB version 3.55

Windows GPIB is a windows program to send and receive program data over the GPIB in response to commands entered from the keyboard or from a command file. Windows GPIB currently only supports National Instruments GPIB boards. The human interface was designed to be more helpful, natural and user friendly than the National Instruments program WIBIC. Windows GPIB utility is a good tool for testing mnemonics and commands while developing Automated Test programs. Download and Install Instructions: Download the file below and save it to your PC's hard drive. Unzip the file. Run the setup.exe file to begin the installation process.

Drivers, Software Downloads 1.36 MB 14/02/2006

Trace Manager version 1.30

This 16-bit Windows program captures and plots data traces from Anritsu VNAs. The data can be manipulated, archived and made available to other windows applications. Download and Install Instructions: Download the file below and save it to your PC's hard drive. Unzip the file. Run the setup.exe file to begin the installation process.

Drivers, Software Downloads zip 4.31 MB 14/02/2006

Lightning Command Encyclopedia (LCE)

The Lightning Command Encyclopedia (LCE) is a searchable, Windows-based, fully integrated command databse for the Lightning Vector Network Analyzer.  The LCE provides command mnemonic names, descriptions and usage information, and is searchable by mnemonic, description, query command, application and user comment.  It is designed to serve as a rapid development tool to simplity the creation of 37XXX series remote control applications.  It provides everything necessary to create GPIB programs. Download Instructions Click on Download Now Save the file in a temporary folder on your PC's hard drive Extract all the installation files from the downloaded zip file Execute the setup.exe file.  This will begin the install and walk you through the entire procedure Current Version:  2.03

Drivers, Software Downloads 7.93 MB 8/04/2004

By Product Category

No Records Found
Confirm your country below to see local events, contact information and special offers.