Skip to main content
xr75-dualx

X-ray Inspection System

DualX [Dual Energy]
This product has been discontinued
The DualX analyzes two X-ray signals – both a high and low energy – for a higher detection rate of low-density items, as well as contaminants not previously detectable by standard X-ray systems.

Principle and features of dual energy sensor system

Different materials have varying energy-dependent x-ray attenuation coefficients. X-ray images acquired at high energy and low energy will exhibit different attenuation characteristics.

X-ray energy / Attenuation coefficient

The x-rays generated from an x-ray inspection system have several energy levels. The dual energy inspection system produces two different images from two different energy x-rays simultaneously.

The dual energy inspection system

High energy x-rays produce a brighter image and low energy x-rays produces a darker image. By subtracting the two images acquired at different energies, the system eliminates an image having the same gray level, leaving only contaminants.

Dual energy subtraction better highlights contaminants

The dual energy technology delivers the following unique features compared to conventional X-ray technology:
(1) Low density items can be detected.
(2) Even overlapping products can be inspected without false rejecting.

Dual energy X-ray Image

X-ray Product Top PageX-ray Product Top Page
Overview

Analyzing two different x-ray energy signals, it clearly distinguishes contaminants from products. Performs accurate inspection of low density bones in metal and overlapping products.

  • For dry/wet products
  • Protection class: IP66
  • X-ray output: High (max.350W) / Middle to High (max.210W)
  • System range: For packaged products/ For bulk flow of unpacked fresh food
Detection Areas

A variety of models are available for a wide range of products. For details of detection areas, please submit an online inquiry form.

Model
Detection area
KXE7534AWHZE
KXE7534AWHZE-detection-area
KXE7534CWHZE
KXE7534CWHZE-detection-area
KD7416AWZE/ADWDE
Detection Areas
KD7416ACWZE
Detection Areas
KD7416DWZ
Detection Areas
External Dimensions

[Example model] Maximum width 390 mm, maximum height 220 mm(KXE7534AWHZE)

xr75-dualx-external-dimensions
Specifications
Model
KXE7534AWHZE
X-ray output
Tube voltage 30 to 80 kV, tube current 0.4 to 5.8 mA, output 12 to 350 W
Safety
X-ray leakage maximum 1.0 μSv/h or less, prevention of x-ray leakage by safety devices
Display
15-inch color TFT LCD
Operation method
Touch panel (with touch buzzer)
Detection area 1, 2
Maximum width 390 mm, maximum height 220 mm
Preset memory
200
Belt speed 3 /
Maximum product weight 4
10 to 60 m/min maximum 5 kg
10 to 40 m/min maximum 10 kg (optional)
Power requirements 5
200 Vac to 240 Vac, single phase, 50/60 Hz, 2100 VA or less
Mass 6
370 kg
Environmental conditions 7
Temperature: 0°C to 30°C, relative humidity: 30% to 85%, non-condensing
Protection class
Conveyor: IP66 Other parts: IP65
Exterior
Stainless steel (SUS304)
1: The product size should fall below the detection area.
2: The entrance and exit may require covers depending on the length of a product.
3: Variable depending on Product No.
4: Sum total of product weight on the conveyor.
5: Allowable power fluctuation range is ±10%.
6: Mass without option.
7: The temperature between 0°C and 35°C when an optional cooling system is installed.
Library
IMAGES
VIDEOS
Related Product
Confirm your country below to see local events, contact information and special offers.