Skip to main content

Test and Measurement

Spectrum Analyzer/Signal Analyzer
New Signal Analyzer MS2840A with Best-in-Class Pure Phase Noise Performance. MS2840A using new synthesizer design achieves excellent close-in SSB phase noise performance of –123 dBc/Hz (10 KHz offset) at 1 GHz measurement frequency and -100 dBc/Hz (with Waveguide Mixer, 10 KHz offset, meas.) at a measurement frequency of 79 GHz. MS2840A Supports wideband and narrowband measurements to create cost-efficient single instrument for testing microwave backhaul and PMR, as well as satellite communications and radar.
Bluetooth Test Set MT8852B
Bluetooth Test Set
The Bluetooth Test Set MT8852B is the market-leading RF measuring instrument for design proving and production test of a wide range of products that integrate Bluetooth® technology in line with latest Bluetooth 5. It supports Basic Rate (BR), Enhanced Data Rate (EDR) and Bluetooth low energy (BLE), including new 2 Mbps Low Energy PHY (2LE) and Bluetooth Long Range (BLR) options.
Network Master Flex MT1100A
Network Master Flex
Today’s core and metro communications networks are implementing 100 GigE and OTN technologies rapidly to provide sufficient bandwidth supporting the explosive increase in mobile communications data. These high-bit-rate networks demand very high reliability due to the large data volumes and variety of client signals in use.
Wireless Connectivity Test Set
The Wireless Connectivity Test Set MT8862A is for measuring the RF TRx characteristics of WLAN IEEE802.11a/b/g/n/ac equipment. It uses standard WLAN protocol messaging in the Network Mode to measure test items, such as Tx power, modulation accuracy (EVM), Rx sensitivity (PER) etc., at connection with the device under test (DUT).
Signal Quality Analyzers MP1800A
Signal Quality Analyzers
Anritsu’s Signal Quality Analyzer (MP1800A) incorporates a Pulse Pattern Generator (PPG) module for generating the highest-quality, highest-amplitude signals in the industry, as well as an Error Detector (ED) module with the highest input sensitivity available. The number of channels per MP1800A-series PPG or ED module can be selected from 1ch, 2ch or 4ch, supporting multichannel synchronization for up to 8 channels at 32 Gbit/s. As a result, each channel of AOC, CFP, CXP, QSFP+, etc., modules can be measured simultaneously, enabling crosstalk and skew tolerance evaluation tests.

Mobile Wireless Communications


Anritsu is a pioneer in the implementation of next-generation wireless technologies while continuing to support existing standards. We offer solutions for the full range of 2G, 2.5G, 3G, 4G, and 5G telecommunications as well as current and next-generation 3GPP, 3GPP2, and IEEE standards including 1xEV, GSM/GPRS, W-CDMA, HSDPA, 802.11, and 802.16. Our portfolio encompasses instrumentation ready to test both early next-generation specifications and legacy technologies. From the chipset to the installed product, our wireless test equipment covers the entire life cycle of wireless infrastructure and user equipment.

For Channel Emulator, please visit Azimuth Systems Inc.

RF & Microwave


Anritsu is the industry standard for RF and Microwave Test and Measurement equipment for both field and lab environments, with instruments operating at all frequencies up to 110 GHz and beyond. Our handheld Site Master Cable and Antenna Analyzer, for example, enables field technicians to troubleshoot microwave cables and communication systems and detect problems before they become costly, time-consuming system failures. Other products are suitable for R&D and manufacturing applications, providing extremely accurate measurements of power, network analysis, signal analysis and frequency.

Broadcasting and Multimedia

Devices and Components Test


The more complex your network or design, the more devices and components must be tested to ensure consistent performance and meet SLAs. Anritsu provides both inline components to continually verify signal strength, power, and throughput; and external test instruments that can quickly isolate a bad connection or failed component. Anritsu’s broad experience in wireless and optical technology enables us to offer component and device testing solutions that are accurate, reliable and easy to use.

Transport Datacom


Transport datacom applications require extremely high reliability as well as frequent monitoring and testing at each stage of the R&D, manufacturing, deployment and maintenance lifecycle. Anritsu provides a range of measurement instruments for Bit Error Rate (BER), Frame and Protocol testing, for networks using such technologies as IP, Ethernet, MPLS, SONET, SDH, DWDM, ATM, ISDN, SS7, VoIP, PDH, DSn as well as future systems up to 43.5 Gbps. Our products are used both by designers and manufacturers of transport and datacom systems and by end user companies monitoring their own systems.



Anritsu offers a complete range of test and measurement equipment for the optical communications industry including R&D, production, installation, monitoring, and manufacturing.  Anritsu is a recognized leader in high-speed optical technology offerings and field test solutions  including evaluating a wide range of optical devices and fiber systems like DWDM. Critical measurements such as OTDR, Chromatic Dispersion, Polarization Mode Dispersion, Loss Test Set, and Optical Return Loss can be made quickly and accurately to maximize network performance and accelerate the deployment of new services.

Discontinued Models


Anritsu Test and Measurement solutions are designed for various electronics and communications applications and markets. These includes all of the telecommunications markets: mobile wireless and wire-line, RF and microwave, broadcasting and multimedia markets.

Confirm your country below to see local events, contact information and special offers.