Skip to main content

Anritsu New 32 Gbaud PAM4 High Amplitude Output and CTLE/PAM4 Decoder BER Test Functions for MP1800A Series

2017/2/2

Upgrades to MP1800A Signal Quality Analyzer capabilities expands support for both NRZ and PAM4 measurement

Anritsu New 32 Gbaud PAM4 High Amplitude Output and CTLE/PAM4 Decoder BER Test Functions for MP1800A Series

Anritsu Corporation is releasing two upgrades to strengthen the company’s 32 GBaud PAM4 BER test solutions for its Signal Quality Analyzer MP1800A series.
The newly developed G0375A 32 Gbaud Power PAM4 Converter and G0376A 32 Gbaud PAM4 Decoder with CTLE support the PAM4 input tests and BER measurements defined in the next-generation 200GbE/400GbE and CEI-56G standards.

[Development Background]
Faster communications speeds between servers and network devices are being investigated to help cope with the recent explosive increase in data traffic. The 200GbE/400GbE next-generation Ethernet standard not only uses faster symbol rates and multiple lanes to increase transmission capacity per unit time but also used PAM (pulse amplitude modulation).

Like the NRZ method, evaluation of PAM4 optical communications modules requires a high-amplitude test signal for direct-driving the optical modulator performing the electro-optical conversion. Additionally, evaluation of EA Modulators must take non-linearity of the optical output level into consideration and requires a signal source supporting independent adjustment of the PAM4 signal 3Eye amplitude.

On the other hand, the BER of the 4-level PAM4 signal is measured like the NRZ method by splitting into two binary signals at the PAM4 decoder. Furthermore, confirming the correlation with simulation results requires use of an equalizer circuit such as a Continuous Time Linear Equalizer (CTLE) and BER measurement of a signal corrected for transmission path loss.

Anritsu expects that its signal source for implementing 32 Gbaud PAM4 BER measurements and BER measurement solutions will play a major role in development of next-generation PAM4 communication standards.

[Outline of PAM4 Signal Evaluation using G0375A/G0376A and MP1800A Series]
The Signal Quality Analyzer MP1800A is a plug-in module type Bit Error Rate Tester; the built-in 32G multichannel PPG and ED modules assure multichannel, high-quality signal generation and high-input-sensitivity measurement.

The newly developed G0375A and G0376A are remote heads for addition to the MP1800A series 32G PPG/ED to extend measurement support for both NRZ and PAM4 measurements using NRZ measuring instruments.

Combining the G0375A with the 28G/32Gbit/s PPG MU183020A converts 32 Gbit/s NRZ signals to PAM4 signals to output a high-amplitude signal of 4.4 Vp-p (differential, max.). Additionally, the 3ch PPG synchronization function for independent control of the PAM4 signal 3Eye amplitudes enables high-reproducibility evaluation of optical modulators without using an external driver amplifier.

With built-in PAM4 decode and CTLE functions, the G0376A supports measurement of PAM4 decoded binary signals using the 28G/32Gbit/s High Sensitivity ED MU183040B. In addition, combination with the CTLE function supports high-efficiency, input-sensitivity performance tests.

[G0375A Features]

  • 10 to 32.1 Gbaud rate
  • Optical modulator direct driving
    • High output amplitude of 4.4 Vp-p max. (differential)
    • 3Eye independent level control
  • High-quality, low-jitter output waveform

[G0376A Features]

  • 10 to 32.1 Gbaud rate
  • High input sensitivity of 40 mV typical (per eye, single-end, Eye Height)
  • BER measurement after PAM4 Eye opening adjustment using continuously variable CTLE Gain of –12 to 0 dB
  • Real-time PAM4 BER Measurement using PAM4 Decoder and 2ch Error Detector

Details of PAM4 solutions

Target Markets: High-end servers, communications equipment, optical transceivers
Applications: R&D of high-speed electronic devices, optical devices, optical transceiver modules


About Anritsu

Anritsu Corporation (www.anritsu.com) has been a provider of innovative communications solutions for more than 120 years. The company's test and measurement solutions include wireless, optical, microwave/RF and digital instruments, operations support systems and solutions that can be used during R&D, manufacturing, installation, and maintenance. Anritsu also provides precision microwave/RF components, optical devices, and high-speed devices for design into communication products and systems. With the addition of OSS monitoring solutions it has expanded its offering to provide complete solutions for existing and next-generation wireline and wireless communication systems and service providers. Anritsu sells in over 90 countries worldwide with approximately 4,000 employees.

For further information please contact:
actw.marketing@anritsu.com

在下面確認您所在國家/地區,以查看當地活動、聯絡資訊和特惠活動。