Skip to main content

Upgrade for Anritsu’s industry-leading Bluetooth tester adds support for the latest Bluetooth 4.2 specification’s longer data packets

2014/12/15
Users can perform radio layer testing that complies with the newly introduced Bluetooth Core 4.2 specification, including its provision for Bluetooth Low Energy ‘Data Length Extension’

MT8852B.jpg

Anritsu announced an upgrade to its MT8852B Bluetooth tester, providing support for the Data Length Extension introduced to Bluetooth Low Energy as part of the latest Bluetooth Core Specification version 4.2.

With the new Data Length Extension option, designers and manufacturers of Bluetooth® Smart and Bluetooth Smart Ready devices can use the MT8852B to conduct radio layer tests that comply fully with the newly adopted Bluetooth 4.2 standard. The extension of the data packet length in Bluetooth Low Energy from 37 octets to 255 octets increases the effective throughput of the system by reducing overhead and improving efficiency when transmitting data.

The new measurement option in the MT8852B supporting the extended packet structure adds to the six Bluetooth Low Energy test cases already supported by the tester. The new test cases can be run as part of a test script to simplify the creation of test programs and to reduce test times.

For instance, engineers can use the MT8852B to complete a test script implementing Bluetooth Basic Rate, Enhanced Data Rate (EDR) and Bluetooth Low Energy measurements in less than 15 seconds by pressing a single key or sending a single remote command, greatly simplifying production test programs.

Bluetooth Low Energy measurements are performed directly on the MT8852B, which controls the device-under-test using the Direct Test Mode (DTM) over USB and RS232 HCI, 2-wire or USB-to-serial-adaptor control interfaces.

For development applications, the MT8852B BLE Data Length Extension option is supplied with a PC application which displays reference test packets in a graphical format, as well as providing a clear pass/fail status for all supported measurements against the specified limits. This facilitates the identification of the causes of any device failure during the critical design and development stages.

MT8852B Bluetooth Test Set

The MT8852B offers the most comprehensive testing facilities of any Bluetooth test set. It is widely used by leading device developers and manufacturers for Bluetooth Basic Rate, EDR, Bluetooth Audio and Bluetooth Low Energy measurements.

It also has the unique ability to test the Adaptive Frequency Hopping (AFH) feature of Bluetooth, which facilitates co-existence with 2.4GHz 802.11 WLAN products. Support software includes Anritsu’s BlueSuite Pro3 and BLE Measurement Software PC applications for viewing Bluetooth packet waveforms, and CombiTest for automating high volume production test.

The MT8852B BLE Data Length Extension option will be available February 16, 2015.

About Anritsu

Anritsu Corporation (www.anritsu.com) has been a provider of innovative communications solutions for more than 110 years. The company's test and measurement solutions include wireless, optical, microwave/RF and digital instruments, operations support systems and solutions that can be used during R&D, manufacturing, installation, and maintenance. Anritsu also provides precision microwave/RF components, optical devices, and high-speed devices for design into communication products and systems. With the addition of OSS monitoring solutions it has expanded its offering to provide complete solutions for existing and next-generation wireline and wireless communication systems and service providers. Anritsu sells in over 90 countries worldwide with approximately 4,000 employees.

 

For further information please contact:

actw.marketing@anritsu.com

在下面確認您所在國家/地區,以查看當地活動、聯絡資訊和特惠活動。