Skip to main content
ms2840a

Spectrum Analyzer/Signal Analyzer

MS2840A
Поддержка этого продукта прекращена
overview
  • Frequency range of 9 kHz to 3.6 GHz/6 GHz/26.5 GHz/44.5 GHz; 44.5 GHz max. built-in preamp option
  • Best close-in phase noise performance in middle range signal analyzer/spectrum analyzer:
    • –123 dBc/Hz (at 1 GHz center frequency, 10 kHz offset frequency with all frequency models)
    • –138 dBc/Hz (at 1 GHz center frequency, 10 kHz offset frequency with 3.6 GHz and 6 GHz models, meas.)
    • –140 dBc/Hz (at 150 MHz center frequency, 10 kHz offset frequency with 3.6 GHz and 6 GHz models, meas.)
  • Wide dynamic range measurement of either 50 GHz to 75 GHz, or 60 GHz to 90 GHz frequency bands using High Performance Waveguide Mixer MA2806A/MA2808A (with 26.5 GHz and 44.5 GHz models)
  • Measurements up to 325 GHz using External Mixer (Harmonic Mixer) MA2740C/MA2750C Series (with 26.5 GHz and 44.5 GHz models)
  • 31.25 MHz analysis bandwidth (standard); 125 MHz max. (option)
  • All-in-one solution with built-in signal generator option supports TRx tests (with 3.6 GHz and 6 GHz models)
  • Measurement applications (options): Phase Noise Measurement, Noise Figure Measurement, Vector and Analog Modulation Analysis, BER Measurement

Related Solutions: High-performance Millimeter-wave Spectrum with New Circuit Configurations MA2806A/MA2808A

The Spectrum Analyzer/Signal Analyzer MS2840A has an upper measurement frequency limit of 44.5 GHz and its carrier close-in SSB phase noise performance is overwhelmingly best-of-class for middle range models. The MS2840A supports measurements across a wide frequency band ranging from applications such as microwave wireless backhaul, requiring high phase-noise performance to measure transmitter carrier close-in spurious, to VHF/UHF private mobile radio (PMR). Connecting the High Performance Waveguide Mixer MA2806A/MA2808A to the MS2840A not only supports wide dynamic range measurements from 50 to 90 GHz but also eliminates image-response effects at wideband signal measurements, supporting millimeter-wave wideband wireless applications, such as wireless backhaul, automobile radar, WiGig, etc., as well as evaluation of millimeter-wave radar antenna sidelobe characteristics, which requires high sensitivity. Additionally, spectrum measurements up to 325 GHz are supported by connecting the External Mixer (Harmonic Mixer) MA27xxC series.

  • High close-in phase noise performance:
    • –123 dBc/Hz (at 1 GHz center frequency, 10 kHz offset frequency with all frequency models)
    • –138 dBc/Hz (at 1 GHz center frequency, 10 kHz offset frequency with 3.6 GHz and 6 GHz models, meas.)
    • –140 dBc/Hz (at 150 MHz center frequency, 10 kHz offset frequency with 3.6 GHz and 6 GHz models, meas.)
  • Full range of built-in versatile and convenient functions for evaluating wireless Tx characteristics, such as Channel Power, Occupied Bandwidth, Adjacent Channel Leakage Power, Spectrum Mask, Frequency Counter, etc.
  • Frequency vs. Time, Power vs. Time, Phase vs. Time, Spectrogram, CCDF, etc., measurements up to 44.5 GHz using Signal Analyzer function (Resolution Bandwidth: 125 MHz max.)
  • Vector modulation analysis and analog measurements (FM/ΦM/AM)
  • Built-in signal generator option supports all-in-one wireless TRx and BER measurements
  • Measurement of phase noise characteristics of wireless equipment and local signal sources with built-in wireless using Phase Noise Measurement Function (option) making use of MS2840A excellent phase noise performance
  • Accurate noise figure (NF) measurements up to 44.5 GHz using Noise Figure Measurement Function (Option)
Drivers / Software

Software Download
   MS269xA/MS2840A/MS2830A firmware
   Manual

Библиотека
Сопутствующие продукты
Подтвердите вашу страну ниже, чтобы отобразить местные события, контактные данные и специальные предложения.