Skip to main content
MP2100A-BERTWave.jpg

BERTWave SS (Sampling Oscilloscope)

MP2102A
Поддержка этого продукта прекращена Варианты замены: MP2100B
Overview
  • Cost-Effective Clock Recovery
  • High-Speed Eye Pattern Analysis
  • LPFs Supporting Various Applications
  • Excellent Extinction Ratio Measurement
  • All-in-one unit supporting simultaneous Jitter, Eye Pattern and Eye Mask measurements
  • Supports all WDP measurements

The BERTWave SS MP2102A with built-in Eye/Pattern analysis functions is the ideal solution for evaluating optical modules used in various transmission equipment. It reduces measurement times by speeding Eye pattern analysis. It supports an optional clock recovery function for waveform evaluation of long-distance transmissions and transmission equipment without clock output. The excellent cost performance of the Anritsu Clock Recovery module reduces equipment investment. Moreover, installing a bank of different low-pass filters supports all important bit rates. In addition, support for wavelengths from 750 nm to 1650 nm offers a full range of waveform evaluations, including VCSEL at 850 nm and long-distance transmissions at 1550 nm. As a result, the MP2102A is the ideal platform for multi-application measurements.

The Jitter Analysis Software MX210001A has high-speed and jitter-measurement function supporting all-in-one measurements, such as simultaneous jitter analysis, Eye pattern measurement and Eye mask test measurements. Moreover, the high-speed sampling increases measurement efficiency by reducing measurement time. And Combining the MX210001A with MATLAB® supports WDP, TWDP and dWDP measurements for evaluating the waveform dispersion of specific signals.

MATLAB® is a trademark of The MathWorks Inc.

 

  

Look at this comparison.

All-in-one PPG, ED, Scope, and Optical IF for incredible, space-saving compactness

 

 

 

>>>Click here for details about the BERTWAVE
supporting all-in-one BERT and Eye/Pulse Scope


>>>Click here for details about the BERTWAVE PE
supporting BER measurements

 

Eye/Pulse Scope

 Bandwidth (-3 dB)  DC to 20 GHz minimum, DC to 25 GHz (Typical)
 Display   Eye pattern, Pulse pattern
 Measurement Function  Statistical (NRZ), Histogram, Mask compliance
 Sampling Speed  100 Ksamples/sec, (Typical)
 O/E Input (Option 003)  Optical data
 Wavelength Range  750 nm to 1650 nm
 Clock Recovery (Option 055)  0.1 GHz to 2.7 GHz, 8.5 GHz to 12.5 GHz

 

MX210001A Jitter Analysis Software

 Operating Conditions  Operates only when installed in MP2100A/MP2102A with correct license information
 The installer runs with V3.00.00 or later
 Other use conditions comply with MP2100A series
 The WDP runs under MATLAB R2010b SP1
 Measurement Algorithm  Histogram mode, Pattern search mode
 Histogram mode  
 Measurement Items  TJ (1.0E-12), TJ (user defined), RJ (d-d), DJ (d-d), DDPWS, J2 jitter analysis, J9 jitter analysis,
 Eye opening
 Pattern Search mode  
 Measurement Items  TJ (1.0e-12), TJ (user defined), RJ (d-d), RJ (rms), DJ (d-d), PJ (p-p), DDJ (p-p), DCD, ISI (p-p),
 Eye opening, J2 jitter analysis, J9 jitter analysis, DDPWS, PJ frequency
 WDP Measurement  Requires installation of MATLAB 2010b by MathWorks
 Measurement Items  WDP, dWDP, TWDP, dTWDP, WDPc, dWDPc, TWDPc, dWDPc
Lineup

BERTWave MP2100A

 

BERTWave MP2100A 

The BERTWave MP2100A is the all-in-one BERT and Eye/Pulse Scope measurement solution. Simultaneous BER measurement and Eye pattern analysis cuts measurement times by eliminating time-consuming setup. The MP2100A series is the ideal all-in-one solution supporting both R&D and manufacturing.

>>>Click here for details about the BERTWave MP2100A

 


BERTWave PE MP2101A

 

BERTWave PE MP2101A

The BERTWave PE MP2101A is the solution just for BER measurements. Expanding the BERTWave PE to 2 channels supports easy, efficient, simultaneous TRx measurements by eliminating complex line changes. Moreover, all-in-one support for PPG/ED crosstalk tests cuts measurement times and setup costs.

>>>Click here for details about the BERTWave PE MP2101A

 


BERTWave SS MP2102A

 

BERTWave SS MP2102A

The BERTWave SS MP2102A is the ideal solution just for high-speed Eye pattern analysis using the built-in clock recovery function which supports evaluation of the optical characteristics of long-distance transmission equipment and devices with no clock output. Built-in time/amplitude test, histogram analysis, and mask/mask margin test functions make it the perfect solution for signal quality analyses.

 


Software

-Jitter Analysis Software-

The Jitter Analysis Software MX210001A has a new, high-speed, jitter-measurement function supporting all-in-one measurements, such as simultaneous jitter analysis, and Eye pattern measurement and Eye mask test measurements.
Moreover, the high-speed sampling increases measurement efficiency by cutting measurement time. And Combining the MX210001A with MATLAB supports WDP, TWDP and dWDP measurements for evaluating the waveform dispersion of specific signals.

>>>Click here for details about the Jitter Analysis Software MX210001A

 

-Transmission Analysis Software-

The Transmission Analysis Software MX210002A to the BERTWave supports Tx analyses (S21 Gain, Phase), and waveform simulation (de-embedded) using linear equalizer, filter, and emphasis operations; simultaneous waveform sampling and simulation support simultaneous Eye pattern measurement and Eye mask test measurements. Furthermore, combined tracking with the MX210001A software permits simultaneous post-simulation waveform jitter measurement.

>>>Click here for details about the Transmission Analysis Software MX210002A

Библиотека
Сопутствующие продукты
Подтвердите вашу страну ниже, чтобы отобразить местные события, контактные данные и специальные предложения.