Skip to main content

Anritsu Introduces the Next Generation of Network Transport Testers

30.03.2007
The new CMA5000 universal transport analysis (UTA) module is designed to support today's transport standards and provide the eonly tool you need' for Ethernet, SONET/SDH and much more.

Anritsu Instruments Company, a subsidiary of Anritsu Corporation, a global provider of operational support solutions for advanced and converged networks, introduced today its new transport solution for the CMA5000 platform. The Universal Transport Analysis (UTA) module represents a new generation of tester with the ability to support Ethernet, SONET/SDH, OTN, Fibre Channel, and most other existing transport standards.

Small enough to fit snugly into the CMA5000 platform, the UTA provides field engineers with lots of configurability in a very portable solution by also supporting hot pluggable XFP and SFP transceivers. No matter what equipment requires testing, field engineers are assured of having a test module equipped with the correct optical/electrical interface for every situation.

The UTA module is currently available for 10-GigE and OC-192/STM-64 applications, with other applications available soon.

The 10-GigE UTA application provides technicians and engineers with a powerful set of test functions needed for installing, commissioning, and troubleshooting today’s 10-GigE networks. A single module provides everything necessary to test 10-GigE LAN-PHY and WAN-PHY networks, including traffic monitoring and generation, RFC2544-based performance analysis, continuity check (PING), and loop back tests in switched networks.

For the OC-192/STM-64 application, the UTA not only provides the standard test set, but makes available a smart monitoring function for checking virtual concatenation, LCAS protocol, and differential delay in NGN networks.

“The last few years have witnessed a tremendous evolution of the transport networks with the emergence of new technologies,” says Arnaud Wroblewski, product manager at Anritsu. “Engineers and technicians tasked with the installation, turn-up and maintenance of today’s networks have to deal with this increasing complexity in their daily job. In this context, a test instrument like the UTA – capable of managing all the main technologies in one single module – is a great help.”

“Additionally, thanks to its open architecture, the UTA can easily be updated by software and so protects your investment for the future,” adds Wroblewski.

CMA5000-UTA module highlights:
• Support of 10-GigE LAN-PHY and WAN-PHY:
 - Generation & analysis of Ethernet traffic at 100% line load 
 - Automated 2544 tests 
 - BER tests 
 - SEQUENCE tests
• Support of OC-192/STM-64: 
 - Generates and analyzes SONET/SDH frames down to the tributary level (DS1/E1) 
 - APS measurement with 125 ms of resolution 
  -Automatic detection of network problems with trouble scan features
• Hot pluggable XFP and SFP
• Automatic test reports in PDF
• Upgradeable by software

Availability
The CMA5000 UTA module, with 10-GigE application and OC-192/STM-64 application, will be available for delivery in April 2007.

Подтвердите вашу страну ниже, чтобы отобразить местные события, контактные данные и специальные предложения.