Skip to main content
Isotropic Antenna 2000-1800-R

Isotropic Antenna

This product has been discontinued

The 2000-1800-R isotropic antenna is a tri-axis H-Field sensor with an integrated RF switch. The RF switch is controlled by the analyzer via a USB port.

Each antenna is individually calibrated and comes with a calibration certificate and supporting test data.

In order to conduct EMF measurements, an Anritsu isotropic antenna is required. Anritsu offers the 2000-1800-R isotropic antenna for use with the Electromagnetic Field Measurement System. The 2000-1800-R operates over a frequency range of 9 kHz to 300 MHz. This antenna is a tri-axis H-Field sensor with an integrated RF switch device, microcontroller, and memory. Each of the three sensors is situated orthogonally inside the antenna housing to transmit and receive a spherical radiation pattern. In this way, all radiation at the antenna’s geographical position is measured, regardless of direction of arrival.

The RF switch, microcontroller, and memory inside the antenna are controlled by firmware in the Spectrum Analyzer via a USB cable. The microcontroller operates the RF switch, controlling which probe is active. Once all three probes are switched, a composite RMS calculation is made. The memory inside the antenna is used to store parameters associated with that particular antenna. This includes serial number, date of calibration, antenna frequency range, and calibration factors.

Each isotropic antenna is individually calibrated over its entire frequency range. The antenna factors are stored in the antenna’s memory and automatically downloaded into the Spectrum Analyzer once the antenna USB cable is inserted.


Electrical Characteristics

Type H-Field sensor
Sensor Type Three Axis sensor with scanned axes
Frequency Range 9 kHz — 300 MHz
1 dB Compression Point at Output 118 dbμV Typical
Decoupling of the axis >20 dB typical
VSWR < 1.5 (20 KHz — 50 MHz) typical
RF Connector N-Connector Male, 50 Ω
Supply and Control USB

Mechanical Characteristics

Color Body: B-39047 “Light Grey”
Handle: “Black”
Weight 850 g
Environmental Conditions -10 °C — +50 °C, IP54
Mechanical Compliancy Operating: 7M3 (IEC 60721-3)
Loop Diameter 112 mm
Dimensions 550 mm × 146 mm × 146 mm

The Electromagnetic Field Measurement Option is available in the following handheld analyzers.

Product Model Option Number
Spectrum Master MS2711E MS2711E-0444
Spectrum Master MS2712E MS2712E-0444
Spectrum Master MS2713E MS2713E-0444
Spectrum Master MS2720T MS2720T-0444
Cell Master MT8212E MT8212E-0444
Cell Master MT8213E MT8213E-0444
LMR Master S412E S412E-0444