Skip to main content

Anritsu introduces Industry’s First 4x4 MIMO 256QAM Measurement Software Supporting All DL 3CC CA Band Combinations

26-10-2016

Anritsu Corp Japan Introduces Industry’s First 4x4 MIMO 256QAM Measurement Software Supporting All DL 3CC CA Band Combinations.Combining two MT8821C units supports unrestricted DL 3CC CA 4x4 MIMO 256QAM measurements and settings for all CC bands and bandwidth configurations

Bangalore– October 26, 2016 – Anritsu Corp Japan Introduces Industry’s First 4x4 MIMO 256QAM Measurement Software Supporting All DL 3CC CA Band Combinations.

Combining two MT8821C units supports unrestricted DL 3CC CA 4x4 MIMO 256QAM measurements and settings for all CC bands and bandwidth configurations

Anritsu Corporation (President Hirokazu Hashimoto) has developed the industry’s first 4x4 MIMO*1 256QAM evaluation function supporting all 3CC CA*2 band combinations and strengthening the functions of the company’s Radio Communication Analyzer MT8821C. With this new release, tests of LTE-Advanced DL 3CC CA 4x4 MIMO 256QAM mobiles are supported with no restrictions on frequency and signal bandwidth combinations. This software update is available from October 26.

With built-in LTE-Advanced RF TRx test base station emulation functions, the all-in-one MT8821C already supports all DL 2CC CA 4x4 MIMO and DL 3CC CA standards. Combining two MT8821C units with this firmware update adds support for evaluating 4x4 MIMO 256QAM RF Rx*3 performance for all DL 3CC CA band combinations as part of Anritsu’s measurement solutions for facilitating deployment of LTE-Advanced broadband multi-function networks.

[Development Background]
The explosive increase in rich-content services, such as mobile video on demand, is driving deployment of the faster LTE-Advanced technology by network operators worldwide.

The key technologies for increasing the speed of LTE-Advanced are carrier aggregation, which aggregates several component carriers into one, and MIMO, which uses multiple antennas for communications.
Anritsu launched its DL 4x4 MIMO measurement software in March 2016 and supports evaluation of LTE-Advanced DL 2CC CA 4x4 MIMO terminals with its all-in-one MT8821C. The MT8821C outputs up to 8 independent signals but by synchronizing two MT8821C units using this newly developed software, up to 12 signals can be output for 4x4 MIMO 256QAM measurements, supporting all DL 3CC CA band combinations.

[Product Outline]
Product: Radio Communication Analyzer MT8821C
Key Functions: RF TRx tests and base-station emulation
New Function: Using a configuration of two synchronized MT8821C units in which the previously released LTE-Advanced DL 3CC CA measurement software and this new 4x4 MIMO measurement software have been installed supports evaluation of 4x4 MIMO 256QAM UE for all DL 3CC CA band combinations.

[Target Markets and Applications]

  • Target Markets: Chipset and UE makers, communications carriers
  • Target Applications: Development of chipsets and UE hardware, carrier acceptance inspection tests

[Terminology]
*1 MIMO (Multiple Input Multiple Output)
Technology for achieving fast communications speeds by using multiple antennas to send and receive data simultaneously; 4x4 MIMO uses four antennas each for sending and receiving.

*2 3CC CA
Carrier aggregation (CA) is a technology for increasing data transmission rates by securing a wider bandwidth by simultaneously using multiple component carriers. It is classified into three main types according to the arrangement of each component carrier: Inter Band CA, Intra-Band Contiguous CA, and Intra-Band Non-contiguous CA.

  • Inter Band CA: Separate band allocated for each component carrier
  • Intra-Band Contiguous CA: All component carriers allocated in one band and with contiguous frequencies
  • Intra-Band Non-contiguous CA: All component carriers allocated in one band but with non-contiguous frequencies

3CC CA is a carrier aggregation using three component carriers.

*3 RF TRx Performance Evaluation
Test for evaluating whether UE can receive DL signal with level close to Rx sensitivity level; specified by 3GPP TS 36.521-1 Chapter 7 for LTE.


About Anritsu

Anritsu India Pvt Ltd is 100% subsidiary of Anritsu Corp Japan. Anritsu Corporation, a global provider of innovative communications test and measurement solutions for 120 years. Anritsu’s “2020 VISION” philosophy engages customers as true partners to help develop wireless, optical, microwave/RF, and digital solutions for R&D, manufacturing, installation, and maintenance applications, as well as multidimensional service assurance solutions for network monitoring and optimization. Anritsu also provides precision microwave/RF components, optical devices, and high-speed electrical devices for communication products and systems. The company develops advanced solutions for 5G, M2M, IoT, as well as other emerging and legacy wireline and wireless communication markets. With offices throughout the world, Anritsu has approximately 4,000 employees in over 90 countries.

To learn more visit www.anritsu.com and follow Anritsu on Facebook, Google+, LinkedIn, Twitter, and YouTube.

Anritsu Contact:
Madhukar Tripathi
Sr. Manager – Marketing & Channel Sales
Anritsu India Pvt Ltd
Office No 18, Ground Floor,
Stellar IT park, C25, Sect 62
NOIDA (UP) INDIA
Pin Code 201 309
Phone +91 120 4211330-31-32
Email Madhukar.Tripathi@anritsu.com
Cell Phone : +91 9310 666 466

Confirm your country below to see local events, contact information and special offers.