Skip to main content
K252/V252 Kelvin Bias Tee

Kelvin Bias Tee

This product has been discontinued
Kelvin Connection Bias Tee is designed for applications where both DC and RF signals are applied to the Device under Test (DUT) and precision DC measurements are required.  A high resistance of the DC coil results in a voltage drop that leads to a DC Biasing voltage error in the measurements.  A Kelvin connection bias tee is used to eliminate DC Biasing errors as the sense coil allows accurate measurement of the DC Voltage applied across the DUT.  Both 40 GHz and 65 GHz models are available with precision K Connectors and V Connectors respectively.  A male connector for the RF input and a female connector for the output is the standard interface for K252 and V252 Bias Tees.  A SMC connector is standard for DC Bias and Sense connections.  Other connector types with different connector configurations can be ordered through factory.
  • Broadband 0.1 to 65 GHz frequency coverage
  • 50 V and 500 mA current capability
  • Low Insertion and SWR performance




 Frequency Range 3dB BW

 100 MHz to 40 GHz

100 MHz to 65 GHz 

 Insertion Loss

 <2.5 dB typical

 <3.7 dB typical 

 Return Loss

11 dB 

10 dB to 60 GHz
8 dB to 65 GHz 

 Max DC Current

500 mA 


 Max DC Voltage



 Max RF Power

1 W 

1 W 


 RF In: K(m)
RF Out: K(f)
Bias: SMC(m)
Sense: SMC(m)

RF In: V(m)
RF Out: V(f)
Bias: SMC(m)
Sense: SMC(m) 


Bias: 6  µH
Sense: 8 µH

Bias: 6  µH
Sense: 8 µH 

Confirm your country below to see local events, contact information and special offers.