Skip to main content
560-98C50A

Convertible SWR Autotester

560-98C50A
This product has been discontinued
Overview

Convertible SWR Autotesters reduce capital equipment and maintenance costs. A single Convertible SWR Autotester accurately measures the Return Loss or SWR of devices with SMA, 3.5 mm, or K Connector®. Six interchangeable test port heads (male and female for each connector standard) are precision tuned to the Convertible SWR Autotester's internal bridge circuit.

The inexpensive test port heads save repair and calibration costs, because they are interchangeable. Repetitive connect/disconnect cycles will eventually wear out test port connectors - especially when excess torque is applied and the connector's mating surfaces are rotated against each other.

It is common practice today to avoid the subsequent maintenance cost by using adapters or "Connector Savers" on the test port of the directional device RF Bridge, SWR Autotester, or Directional Coupler. Unfortunately, the adapters attached to a standard RF Bridge cause accuracy problems. Directional devices are tuned for optimum directivity at a specific phase reference point - this position is called the test port. Any test port adapter will degrade the effective directivity. The Convertible SWR Autotester's interchangable test port heads eliminate the accuracy problem.

For supporting documentation, see Library.
Options

Open/Shorts:

 22K50  Male Open/Short
 22KF50  Female Open/Short

Test Port Heads:

 25S50 Precision Matched WSMA male
 25SF50 Precision Matched WSMA female
 25L50 Precision Matched 3.5 mm male
 25LF50 Precision Matched 3.5 mm female
 25K50 Precision Matched K male
 25KF50 Precision Matched K female
 25SKF50 Precision Matched Set, WSMA male & female, K male & female
 25SLF50 Precision Matched Set, WSMA male & female, 3.5 mm male & female, K male & female
* The Convertible SWR Autotester must be used with a test head.

Library
Confirm your country below to see local events, contact information and special offers.