Skip to main content
MS2725C

Spectrum Master

MS2725C
This product has been discontinued Replacement Model(s) : MS2720T
Overview
Spectrum and Interference Analyzer Highlights
  • Measure: Occupied Bandwidth, Channel Power, ACPR, C/I, Emission Masks
  • Interference Analyzer: Spectrogram, Signal Strength, RSSI, Mapping
  • Dynamic Range: > 104 dB in 1 Hz RBW
  • DANL: –160 dBm in 1 Hz RBW @ 1 GHz preamp On
  • Phase Noise: –100 dBc/Hz @ 10 kHz offset at 1 GHz
  • Frequency Accuracy: ± 25 ppb with GPS On
  • 1 Hz to 10 MHz Resolution Bandwidth (RBW)
  • Traces: Normal, Max Hold, Min Hold, Average, # of Averages
  • Detectors: Peak, Negative, Sample, Quasi-peak, and true RMS
  • Markers: 6, each with a Delta Marker, or 1 Reference with 6 Deltas
  • Limit Lines: up to 40 segments with one-button envelope creation
  • Trace Save-on-Event: crossing limit line or sweep complete
  • Sweep Modes: Fast, Performance, No FFT, burst detect

Anritsu's latest generation of handheld spectrum analyzers includes the MS2725C Spectrum Master. This represents the company's highest performance handheld spectrum analyzer from the MS272xC family. Exciting new features and options bring more value to the user over our previous generations:

  • Frequency Coverage - 9 kHz to 32 GHz
  • Broadband preamplifiers over the whole frequency range for increased sensitivity around 20 dB
  • Three Sweep Modes – with improved Sweep Speed - up to 100 times faster
  • Resolution Bandwidths from 1 Hz to 10 MHz
  • New triggering choices including hysteresis, hold-off, and delay
  • More zero-span capabilities including 10 MHz RBW & VBW
  • Enhanced Spectrum Analyzer GUI including large marker display choice
  • Choice of display options for readability – normal, black and white, night vision, high contrast
  • On-screen Interference Mapping as part of the Interference Analysis option
  • LTE Measurements up to 20 MHz
  • 30 MHz Wide Zero-Span IF Output at 140 MHz center frequency for external demodulation of virtually any other wideband signal
  • Burst detect captures 200 μs bursts the first time, every time

The Spectrum Master MS2725C features over 30 analyzers in one to meet virtually every measurement need. In addition to spectrum analysis a user can select optional capabilities and analyzers including:

  • High Accuracy Power Meter
  • Interference Analyzer
  • Channel Scanner
  • 140 MHz Zero-Span IF Output, 30 MHz bandwidth
  • GPS Receiver
  • Increase frequency accuracy, geo-tag data collection
  • Secure data operation
  • 3GPP Signal Analyzers
  • LTE, GSM/EDGE, W-CDMA/HSPA+, TD-SCDMA/HSDPA
  • 3GPP2 Signal Analyzers
  • CDMA2000 1X, CDMA2000 1xEV-DO
  • IEEE 802.16 Signal Analyzers
  • Fixed WiMAX, Mobile WiMAX

For post processing data collected on your instrument utilize Master Software Tools – a PC program included with the instrument. It provides powerful data analysis tools for spectrum clearing and interference monitoring. And the Remote Access Tool allows the user to see and control the instrument over a LAN connection.

Weighing about 8 pounds fully loaded, including a Li-Ion battery, the fully functional Spectrum Master MS2725C family of handheld spectrum analyzers are light enough to take anywhere, including up a tower.

Continuous frequency coverage from 9 kHz to 32 GHz gives the wireless professional the performance needed for the most demanding measurements. Whether your application is spectrum monitoring, hidden signal detection, RF and microwave signal measurements, microwave backhaul testing or cellular signal measurements, the Spectrum Master MS2725C gives you the tools you need to make the job easier and more productive.

Applications

Convenient operating procedures, high sensitivity, excellent repeatability and exceptional performance enable the MS2725C to simplify measurements on wireless systems for easy verification of system compliance. Typical applications include:

  • Transmitter Spectrum Analysis - occupied bandwidth, channel power, adjacent channel power ratio and modulation
  • Received Signal Analysis - location and identification of in-band interference and out-of-band spurious signals and spectral masks
  • Signal Strength Mapping - to determine the most suitable location for antennas, base stations and repeaters
  • Field analysis of 3G signals – fast sweep speed, field-swappable battery, smart measurements and daylight-viewable display make the MS2725C an ideal choice for the challenge of rugged environments
  • Broadcast measurement AM & FM analog and IBOC proofing measurements
  • Interference mitigation in many diverse situations including wireless patient telemetry in hospitals
  • Burst detect captures 200 μs bursts the first time, every time
Options

   Option   

Description

Option Ordering Number

Option 7

Secure Data Operation

MS2722C-0007

Option 31

GPS (GPS antenna required - part number 2000-1528-R)

MS2722C-0031

Option 19

High Accuracy Power Meter (Power Sensor not included)

MS2722C-0019

Option 25

Interference Analysis - provides a spectrogram display, signal strengh with
audible tone and RSSI (received signal strength indication)

MS2722C-0025

Option 27

Channel Scanner - adds the capability to select
up to 20 channels or signals to monitor
(Great for interference mitigation)

MS2722C-0027

Option 89

Zero Span IF Output

MS2722C-0089

Option 9

RF & Demodulation Hardware

MS2722C-0009

Option 40

GSM/GPRS/EDGE RF Measurements (requires Option 009)

MS2722C-0040

Option 41

GSM/GPRS/EDGE Demodulation (requires Opt. 009)

MS2722C-0041

Option 44

W-CDMA/HSDPA RF Measurements (requires Option 009)

MS2722C-0044

Option 45

W-CDMA Demodulator (requires Opt. 009)

MS2722C-0045

Option 65

W-CDMA/HSDPA Demodulator (requires Option 009)

MS2722C-0065

Option 35

W-CDMA/HSDPA OTA (requires Opt. 009 and 0031)

MS2722C-0035

Option 60

TD-SCDMA / HSDPA RF Measurements (requires Option 009)

MS2722C-0060

Option 61

TD-SCDMA Demodulator (requires Option 009)

MS2722C-0061

Option 38

TD-SCDMA / HSDPA (OTA) Over the Air (requires Option 009)

MS2722C-0038

Option 509 AM/FM/PM Analyzer MS2725C-0509

Option 541

LTE RF Measurements

MS2722C-0541

Option 542

LTE Modulation Measurements

MS2722C-0542

Option 543

LTE BW = 15 MHz, 20 MHz (requires Option 0541 or 0542)

MS2722C-0543

Option 546

LTE Over-the-Air (OTA) Measurements

MS2722C-0546

Option 551 TD-LTE RF Measurements (BW = 10 MHz) MS2725C-0551
Option 552 TD-LTE Modulation Measurements (BW = 10 MHz) MS2725C-0552
Option 556 TD-LTE Over-the-Air Measurements MS2725C-0556

Option 42

cdmaOne / CDMA 2000 1X RF Measurements (requires Option 009)

MS2722C-0042

Option 43

cdmaOne/ CDMA2000 1X Demodulator (requires Option 009)

MS2722C-0043

Option 33

cdmaOne / CDMA2000 1X Over The Air (OTA) Measurements
(requires Option 009 and 0031)

MS2722C-0033

Option 62

CDMA2000 1xEV-DO RF Measurements (requires Option 009)

MS2722C-0062

Option 63

CDMA2000 1xEV-DO Demodulator (requires Option 009)

MS2722C-0063

Option 34

CDMA2000 1xEV-DO Over The Air (OTA) Measurements
(requires Option 009 and 0031)

MS2722C-0034

Option 46

Fixed WiMAX RF Measurements (requires Option 009)

MS2722C-0046

Option 47

Fixed WiMAX Demodulation (requires Option 009)

MS2722C-0047

Option 66

Mobile WiMAX Demodulation (requires Option 009)

MS2722C-0066

Option 67

Mobile WiMAX Demodulation (requires Option 009)

MS2722C-0067

Option 37

Mobile WiMAX, Over the Air (requires Option 009)

MS2722C-0037

Option 90 Gated Sweep MS2722C-0090

Library
VIDEOS
MA8100A Tutorial – Generating 3D Building Maps

MA8100A Tutorial – Generating 3D Building Maps
Step by step instructions for creating and generating 3D building maps with floorplans

MA8100A Installation Tutorial

MA8100A Tutorial
Step by step installation instructions. NEON Signal Mapper, a 3D in-building solution.

NEON Indoor Mapping with Anritsu LMR Master

NEON Indoor Mapping
TRX NEON Signal Mapper and command software shows mapping in real time

Anritsu MA8100A TRX NEON Signal Mapper

TRX NEON Signal Mapper
Test when GPS is not available, deliver real-time 3D location, for indoor measurement applications

Bug Hunting with Anritsu's Spectrum Master

Bug Hunting with Anritsu's Spectrum Master
Finding hidden transmitters and bugs can be difficult. You need the right tools for the job.

Burst Detect

Burst Detect
Watch this video to learn more about the new Burst Detect mode available on the Anritsu Spectrum Master MS272xC

Creating Complex Limit Lines From Standards Documents

Creating Complex Limit Lines from Standards Documents
Learn more about In-band On Channel measurements for Proofing HD radio Signals

DTV Single Frequency Network Measurement Solution

Anritsu's DTV Single Frequency Network Measurement Solution
Learn how to solve frequency interference when using Single Frequency Networks

Interference Mapping

Anritsu Interference Location Mapping
Spectrum analyzers provide accurate RF power measurements over a wide frequency range.

Introducing SweepMasters Pro and Pro Plus

Sweep Master Pro & Pro Plus
Learn how Sweep Master Pro and Sweep Master Pro+ can deliver results 75% faster!

Anritsu Spectrum Analyzers Reveal Hidden Transmitters

Anritsu Spectrum Analyzers Reveal Hidden Transmitters
High performance handheld spectrum analyzers are ideal for detecting and locating hidden transmitters because you can easily carry the instrument when hunting for the transmitter.

SweepMasters Pro and Pro Plus Tutorial

SweepMaster Tutorial
This tutorial gives an overview of the features and functionality of both tools

Confirm your country below to see local events, contact information and special offers.