Skip to main content

Anritsu reduce manufacturing test times of smartphones and wireless modules by 80%

10/10/2012
—The new MT8870A can test all the latest technologies from a single TRx module, including LTE, WCDMA, CDMA2000, 1xEVDO and GSM —

MT8870a_00p_thb.jpg

For immediate release - Anritsu Corporation announces the launch of its new MT8870A Universal Wireless Test Set. The MT8870A has been designed to deliver the most cost effective test system for those companies manufacturing the latest generation of smartphones, laptop or tablet PCs and wireless connectivity modules.


A single MT8870A mainframe can contain up to four transmitter/receiver (TRx) modules. This architecture enables the parallel test of multiple radios from a single MT8870A mainframe, dramatically increasing production throughput whilst minimising initial investment in the production line.


MT8870A can test all the latest technologies from a single TRx module, including LTE, WCDMA, CDMA2000, 1xEVDO and GSM. The provision of 160MHz measurement bandwidth as standard means that the latest generation WLAN 802.11ac radios are supported, as well as Bluetooth 4.0.


To minimise test times, call processing between the MT8870A and the device under test is eliminated. Each TRx module comprises a vector signal generator and vector signal analyser, capable of generating and capturing test packets respectively. Test times are further reduced through the use of a dedicated dual core processor on each TRx module. The result is test times that are up to 80% shorter than previous generation instruments. The versatile architecture supports rapid and economical expansion of production capability by adding additional TRx modules. Additional measurement software and waveform files can also be added as demand requires.


Supplied CombiView software provides a familiar Windows style interface to configure all cellular and short range wireless measurements. Multiple results windows display common graphics including spectral response, constellation diagrams and burst profiles.


MT8870A is rapidly integrated into a production line with the use of supplied CombiTest software. CombiTest is used to create and run custom test plans and provide a results data base, reducing initial start-up software development costs. Custom control packages exist for all common cellular and SRW chip sets.


“With the introduction of the MT8870A, Anritsu have once again shown tremendous innovation. The unique modular design reduces our customers manufacturing costs and provides a very flexible platform on which they can confidently plan their future production. MT8870A has a small footprint whist delivering the lowest test port cost and highest production throughput” said Jonathan Borrill, Director Marketing Strategy Solutions, from Anritsu.

About Anritsu

Anritsu Corporation (www.anritsu.com) has been a provider of innovative communications solutions for more than 110 years. The company's test and measurement solutions include wireless, optical, microwave/RF and digital instruments, operations support systems and solutions that can be used during R&D, manufacturing, installation, and maintenance. Anritsu also provides precision microwave/RF components, optical devices, and high-speed devices for design into communication products and systems. With the addition of OSS monitoring solutions it has expanded its offering to provide complete solutions for existing and next-generation wireline and wireless communication systems and service providers. Anritsu sells in over 90 countries worldwide with approximately 4,000 employees.

Contact Us

Jonathan Borrill
Director of Marketing
Anritsu EMEA Limited
200 Capability Green
Luton
Bedfordshire
LU1 3LU
Tel: 01582 433200
Fax: 01582 731303
Email: Jonathan Borrill

Confirm your country below to see local events, contact information and special offers.