Skip to main content

Signal Analyzers

Signal Analyzers

Choose from an extensive selection of signal analyzer products from DC to 43 GHz and extendable to 110 GHz. 

With excellent total level accuracy, dynamic range and performance, Anritsu spectrum/signal analyzers not only can capture wideband signals but FFT technology supports multifunction signal analyses in both the time and frequency domains. Moreover, the built-in signal generators on some models outputs both continuous wave (CW) and modulated signals for use as a reference signal source.

Improve your design verification and troubleshooting efficiency. With seamless signal capture and VSA analysis in multiple domains signal analyzers make it easy to evaluate burst-signal responses and capture degraded spectrum transients, etc., which cannot be checked by conventional sweep spectrum analyzers.

Model Number
Frequency
Average display noise level
Phase Noise
TOI (Third Order Intercept Point)
ms2840a-small
MS2840A
Spectrum Analyzer/Signal Analyzer
9 kHz — 3.6 GHz
9 kHz — 6 GHz
9 kHz — 26.5 GHz*
9 kHz — 44.5 GHz*
*: Mixers to 325 GHz
-164 dBm/Hz
(1 GHz, preamp ON)
-123 dBc/Hz @ 1 GHz (10 kHz Offset): Std.
-138 dBc/Hz @ 1 GHz (10 kHz Offset, meas.): Opt.
-140 dBc/Hz @ 150 MHz (10 kHz Offset, meas.): Opt.
+16 dBm
(1 GHz)
Spectrum Analyzer/Signal Analyzer MS2830A Microwave
MS2830A Microwave
Spectrum Analyzer/Signal Analyzer
9 kHz — 26.5 GHz*
9 kHz — 43 GHz*
*: Mixers to 325 GHz
-161 dBm/Hz
(1 GHz, preamp ON)
-115 dBc/Hz @ 500 MHz (100 kHz Offset) +15 dBm
(1 GHz)
Signal Analyzer MS2830A
MS2830A
Spectrum Analyzer/Signal Analyzer
9 kHz — 3.6 GHz
9 kHz — 6 GHz
9 kHz — 13.5 GHz
-162 dBm/Hz
(1 GHz, preamp ON)
-115 dBc/Hz @ 500 MHz (100 kHz Offset) +15 dBm
(1 GHz)
Signal Analyzers MS2690A
MS2690A
Signal Analyzers
50 Hz — 6 GHz -166 dBm/Hz
(1 GHz, preamp ON)
-116 dBc/Hz @ 2 GHz (100 kHz Offset) +22 dBm
(1 GHz)
Signal Analyzers MS2691A
MS2691A
Signal Analyzers
50 Hz — 13.5 GHz -166 dBm/Hz
(1 GHz, preamp ON)
-116 dBc/Hz @ 2 GHz (100 kHz Offset) +22 dBm
(1 GHz)
Signal Analyzers MS2692A
MS2692A
Signal Analyzers
50 Hz — 26.5 GHz -166 dBm/Hz
(1 GHz, preamp ON)
-116 dBc/Hz @ 2 GHz (100 kHz Offset) +22 dBm
(1 GHz)
Confirm your country below to see local events, contact information and special offers.