WCDMA/HSPA/HSPA Evolution

Spectrum Analyzer/Signal Analyzer

■ Outline
The MS2830A-044/045 Signal Analyzer includes a spectrum analyzer function for measuring up to 110 GHz using an external mixer based on the 26.5 GHz/43 GHz upper frequency limit. It supports measurements of Tx characteristics, including adjacent channel leakage power, spectrum mask, and frequency counter, as well as spurious measurements requiring a wide dynamic range.

Spectrum Analyzer/Signal Analyzer

■ Outline
The MS2830A is a spectrum analyzer/signal analyzer with top-class measurement speed at medium-class price. It has best-of-class dynamic range (average noise level [DANL]: –153 dBm, third-order intermodulation distortion [TOI]: +15 dBm) and excellent ±0.3 dB (typ.) total level accuracy using unique level calibration technology.

50 Hz to 6 GHz

Signal Analysis will never be the same again

MS269xA Series Signal Analyzers are the latest high performance signal analyzers for next-generation communication applications. The MS269xA Series Signal Analyzer base units include swept spectrum analysis, FFT signal analysis, and a precision digitizer function. Add options to incorporate a Signal Generator, to turn the instrument into a hassle free, plug and play, one box solution.

The MS269xA Series Signal Analyzers support a standard analysis bandwidth of 31.25 MHz that can be extended to 62.5 MHz /125 MHz with optional hardware. Using a patented calibration process, the multipoint amplitude calibration and the phase calibration result in a level accuracy of ±0.5 dB across a 6 GHz span. No other analyzer on the market can meet that specification! These boxes are superlative in every way -- they measure the widest signals and using the latest technology, make measurements faster than ever before. The modular architecture ensures a box that grows as measurement requirements change.

A series of options enables standards-based modulation analysis, vector signal generation, and BER measurement. The end-user can configure a one-box solution that dramatically reduces cost, footprint, and Total Average Cycle Time (TACT) for device evaluation.

The MS269xA Series Signal Analyzers are accurate enough for the most demanding R&D environment, yet are fast enough for the factory floor! Currently supported applications include GSM, GPRS, EDGE, W-CDMA, mobile WiMAX, and LTE.

The wideband FFT signal analyzer (analysis bandwidth of 31.25 MHz with option for 62.5 MHz /125 MHz) supports high-speed continuous measurements including CCDF, frequency vs. time, spectrum, and power vs. time analysis. The standard digitizing function can capture waveforms and immediately play them out using the optional Signal Generator. An extended digitizer option adds the ability to capture signals up to 20 MHz wide for up to 4 hours.

50 Hz to 13.5GHz

Signal Analysis will never be the same again

MS269xA Series Signal Analyzers are the latest high performance signal analyzers for next-generation communication applications. The MS269xA Series Signal Analyzer base units include swept spectrum analysis, FFT signal analysis, and a precision digitizer function. Add options to incorporate a Signal Generator, to turn the instrument into a hassle free, plug and play, one box solution.

The MS269xA Series Signal Analyzers support a standard analysis bandwidth of 31.25 MHz that can be extended to 62.5 MHz /125 MHz with optional hardware. Using a patented calibration process, the multipoint amplitude calibration and the phase calibration result in a level accuracy of ±0.5 dB across a 6 GHz span. No other analyzer on the market can meet that specification! These boxes are superlative in every way -- they measure the widest signals and using the latest technology, make measurements faster than ever before. The modular architecture ensures a box that grows as measurement requirements change.

A series of options enables standards-based modulation analysis, vector signal generation, and BER measurement. The end-user can configure a one-box solution that dramatically reduces cost, footprint, and Total Average Cycle Time (TACT) for device evaluation.

The MS269xA Series Signal Analyzers are accurate enough for the most demanding R&D environment, yet are fast enough for the factory floor! Currently supported applications include GSM, GPRS, EDGE, W-CDMA, mobile WiMAX, and LTE.

The wideband FFT signal analyzer (analysis bandwidth of 31.25 MHz with option for 62.5 MHz /125 MHz) supports high-speed continuous measurements including CCDF, frequency vs. time, spectrum, and power vs. time analysis. The standard digitizing function can capture waveforms and immediately play them out using the optional Signal Generator. An extended digitizer option adds the ability to capture signals up to 20 MHz wide for up to 4 hours.

50 Hz to 26.5 GHz

Signal Analysis will never be the same again

MS269xA Series Signal Analyzers are the latest high performance signal analyzers for next-generation communication applications. The MS269xA Series Signal Analyzer base units include swept spectrum analysis, FFT signal analysis, and a precision digitizer function. Add options to incorporate a Signal Generator, to turn the instrument into a hassle free, plug and play, one box solution.

The MS269xA Series Signal Analyzers support a standard analysis bandwidth of 31.25 MHz that can be extended to 62.5 MHz /125 MHz with optional hardware. Using a patented calibration process, the multipoint amplitude calibration and the phase calibration result in a level accuracy of ±0.5 dB across a 6 GHz span. No other analyzer on the market can meet that specification! These boxes are superlative in every way -- they measure the widest signals and using the latest technology, make measurements faster than ever before. The modular architecture ensures a box that grows as measurement requirements change.

A series of options enables standards-based modulation analysis, vector signal generation, and BER measurement. The end-user can configure a one-box solution that dramatically reduces cost, footprint, and Total Average Cycle Time (TACT) for device evaluation.

The MS269xA Series Signal Analyzers are accurate enough for the most demanding R&D environment, yet are fast enough for the factory floor! Currently supported applications include GSM, GPRS, EDGE, W-CDMA, mobile WiMAX, and LTE.

The wideband FFT signal analyzer (analysis bandwidth of 31.25 MHz with option for 62.5 MHz /125 MHz) supports high-speed continuous measurements including CCDF, frequency vs. time, spectrum, and power vs. time analysis. The standard digitizing function can capture waveforms and immediately play them out using the optional Signal Generator. An extended digitizer option adds the ability to capture signals up to 20 MHz wide for up to 4 hours.

Mobile Device Test Platform

The ME7834 Mobile Device Test Platform is an all-in-one platform supporting multisystem mobile terminal protocol CT and carrier acceptance tests. In addition to supporting standalone tests of W-CDMA and LTE systems, the ME7834 can also be configured as a customized integrated environment for InterRAT tests between LTE, GSM, W-CDMA and CDMA2000 mobile systems.

W-CDMA TRX/Performance Test System

The ME7873F/ME7874F test platform supports the most GCF/PTCRB-approved TS34.121 RF conformance test cases in the world. Various tests with W-CDMA wireless device in loopback status, as well as no-call testing, are supported by configuring a system from various instruments and dedicated software centered on the MD8480C W-CDMA Signalling Tester. Moreover, the all-in-one design supports conformance tests of all 10 UMTS bands (I, II, III, IV, V, VI, VIII, IX, XI, and XIX) used worldwide.

W-CDMA RRM Test System

The ME7873F/ME7874F test platform supports the most GCF/PTCRB-approved TS34.121 RF conformance test cases in the world. Various tests with W-CDMA wireless device in loopback status, as well as no-call testing, are supported by configuring a system from various instruments and dedicated software centered on the MD8480C W-CDMA Signalling Tester. Moreover, the all-in-one design supports conformance tests of all 10 UMTS bands (I, II, III, IV, V, VI, VIII, IX, XI, and XIX) used worldwide.

LTE RF Conformance Test System

The ME7873L LTE RF Conformance Test System is the world’s first GCF-validated RF test platform (test cases validated at CAG#22 in April 2010), supporting the most GCF-approved test cases. The system uses the MD8430A Signalling Tester as an LTE base station simulator and is configured from Anritsu-developed test instruments, interface hardware, and software. The ME7873L supports TRX, Performance, and RRM test cases with the UE in either a test call or no-call test mode. LTE Bands currently supported include FDD 1 to 5, 7 to 14, 17 to 21, and TDD 33 to 40.

Fading Simulator

The MF6900A Fading Simulator connects to the MD8430A Signalling Tester via a dedicated digital interface to easily simulate an LTE base station and run fading simulation tests required by 3GPP LTE 2x2 MIMO and 4x2 MIMO tests.

Universal Wireless Test Set

The MT8870A Universal Wireless Test Set has been specifically designed for the high volume manufacturing test of all common cellular and short range wireless technologies. An MT8870A instrument mainframe can contain up to four MU887000A TRX test modules each capable of independent control by an external PC. Each module has an integrated Vector Signal Generator (VSA) and Vector Signal Analyzer (VSA) to perform both transmitter and receiver RF tests. The MT8870A with the MU887000A test module can be controlled by an external PC.

Radio Communication Analyzer

The MT8820C is an all-in-one Radio Communication Analyzer that is the ideal solution to test LTE, 3G and 2G wireless devices. The MT8820C supports all test functions including signaling, TX parametric, and RX parametric tests. Leveraging the strengths of its predecessor, the MT8820B, the new MT8820C allows users to reduce cost and space over other solutions. The MT8820C can be used with wireless devices that operate between 30 MHz and 2.7 GHz. In addition, the MT8820C maintains backwards compatibility with MT8815B and MT8820B software to accelerate test station setup and reduce installation cost and time when upgrading.

Vector Signal Generator

■ Outline
The MG3700A Vector Signal Generator has a built-in, high-speed, arbitrary waveform baseband generator with a 160 MHz sampling rate. It supports a vector modulation bandwidth up to 120 MHz, has a large arbitrary waveform memory up to 2 GB, and outputs digital modulation signals for major mobile communications, including LTE FDD, LTE TDD, Mobile WiMAX, digital broadcasting ISDB-T/ISDB-Tmm, wireless LAN, GPS, etc.

9 kHz to 4 GHz

Regulatory requirements are growing. You're under increasing pressure to cut costs. And improving system uptime is always a top priority. The MS2712E Spectrum Master helps you do all of this and more. Whether you are performing complex interference analysis or assessing signal quality, the MS2712E Spectrum Master delivers the ease of use, rich functionality, and best-in-class price/performance you've come to expect from Anritsu. Designed to handle the most punishing field conditions, the MS2712E allows you to monitor, locate, identify, and analyze a broad range of cellular, 2G/3G/4G, land mobile radio, Wi-Fi, and broadcast signals. With a rich array of configuration options, the multifunctional MS2712E eliminates the need for you to learn and carry multiple instruments when locating and identifying signals over wide frequency ranges.

9 kHz to 6 GHz

Regulatory requirements are growing. You're under increasing pressure to cut costs. And improving system uptime is always a top priority. The MS2713E Spectrum Master helps you do all of this and more. Whether you are performing complex interference analysis or assessing signal quality, the MS2713E Spectrum Master delivers the ease of use, rich functionality, and best-in-class price/performance you've come to expect from Anritsu. Designed to handle the most punishing field conditions, the MS2713E allows you to monitor, locate, identify, and analyze a broad range of cellular, 2G/3G/4G, land mobile radio, Wi-Fi, and broadcast signals. With a rich array of configuration options, the multifunctional MS2713E eliminates the need for you to learn and carry multiple instruments when locating and identifying signals over wide frequency ranges.

100 KHz to 4 GHz Spectrum Analyzer
2 MHz to 4.0 GHz Cable & Antenna Analyzer

360 Degree View of MT8212E

The MT8212E Cell Master™ Base Station Analyzer is the smallest, lightest, and most economical solution for 2G/3G/4G, and WiMAX base station transmitter testing and ISDB-T and DVB-T/H digital broadcast field testing. It's ideal for installation and commissioning as well as for maintenance and troubleshooting. This optimal combination of base station test capabilities in one handheld device eliminates the need for several independent test instruments, thereby reducing the number of tools the user must carry and learn to operate. Whether it's sweeping cables, making power measurements, finding interference, troubleshooting base station signal quality, or verifying backhaul performance, the Cell Master MT8212E is the ideal all-in-one instrument to help keep your network up and running.

In addition, easyTest Tools™ allows experienced users to Create, Deliver, and Display on-screen work instructions for Cable and Antenna testers. These work instructions make life easier for less-experienced cable and antenna sweepers. Direct benefits include more accurate testing, repeatable results, and less rework. For more details see the easyTest Tools page.

100 KHz to 6 GHz Spectrum Analyzer
2 MHz to 6.0 GHz Cable & Antenna Analyzer

The MT8213E Cell Master™ Base Station Analyzer is the smallest, lightest, and most economical solution for 2G/3G/4G, and WiMAX base station transmitter testing and ISDB-T and DVB-T/H digital broadcast field testing. It's ideal for installation and commissioning as well as for maintenance and troubleshooting. This optimal combination of base station test capabilities in one handheld device eliminates the need for several independent test instruments, thereby reducing the number of tools the user must carry and learn to operate. Whether it’s sweeping cables, making power measurements, finding interference, troubleshooting base station signal quality, or verifying backhaul performance, the Cell Master MT8213E is the ideal all-in-one instrument to help keep your network up and running.

In addition, easyTest Tools™ allows experienced users to Create, Deliver, and Display on-screen work instructions for Cable and Antenna testers. These work instructions make life easier for less-experienced cable and antenna sweepers. Direct benefits include more accurate testing, repeatable results, and less rework. For more details see the easyTest Tools page.

Spectrum Analyzer: 150 KHz to 7.1 GHz
Cable & Antenna Analyzer: 400 MHz to 4.0 GHz
Vector Signal Generator: 400 MHz to 6 GHz

The BTS Master MT8221B is Anritsu's high performance base station analyzer. From the ground up it has been designed to support 4G standards and installed 2G/3G networks. The MT8221B's platform provides a 20 MHz demodulation capability to support LTE bandwidths from 1.4 to 20 MHz. It also features a 30 MHz Zero-Span IF Output for external demodulation of virtually any other wideband signal. In addition, a Vector Signal Generator option is available for comprehensive receiver testing capability with the flexibility to generate two modulated signals plus noise.

BTS Master 150 kHz to 7.1 GHz Spectrum Analyzer

The BTS Master MT8222B is Anritsu's high performance base station analyzer. From the ground up it has been designed to support 4G standards and installed 2G/3G networks. The MT8222B's platform provides a 20 MHz demodulation capability to support LTE bandwidths from 1.4 to 20 MHz. It also features a 30 MHz Zero-Span IF Output for external demodulation of virtually any other wideband signal. In addition, a Vector Signal Generator option is available for comprehensive receiver testing capability with the flexibility to generate two modulated signals plus noise.

Rapid Test Designer (RTD)

The Rapid Test Designer (RTD) is a revolutionary new tool that significantly speeds up the development and deployment of modern wireless user equipment (UE) by greatly simplifying the way in which tests are created, executed, and analyzed. This is achieved by using a graphical flow-chart interface and many innovative tools within the RTD environment.  Users can concentrate on testing specific functions and protocols within the UE without having to be expert on all the 3GPP protocol layers.

SUPL Simulation Server

Low-cost development and verification of mobile terminal OS, middleware, and LBS applications.

MX848600A SUPL Simulation Server is the only Windows PC software that tests SUPL protocols and applications by emulating a software terminal without hardware. It is aimed at low-cost development and verification of mobile terminal OS, middleware, and Location Based Service (LBS) applications. Running the SUPL Server on the same PC as the terminal emulator supports continuous 24/7 testing to shorten development times. Test scenarios created in the terminal emulation environment can be also used in post-processing with Anritsu base station simulator to clarify evaluation responsibilities and shorten the development cycle.

W-CDMA, HSPA, HSPA Evolution, GSM, GRPS, EGPRS

The MD8480C W-CDMA Signaling Tester has been specifically designed for developing and testing 3GPP wireless devices including protocol stacks, chipsets, and application software. Supporting W-CDMA, HSPA, HSPA Evolution, GSM, GPRS and EGPRS services in a single unit, it is the industry's first HSPA signaling tester and the only one with full HSPA capability including 42 Mbps DL/11 Mbps UL maximum data throughput. The MD8480C's air interface fully complies with the 3GPP recommendations.

The MD8480C provides chipset and wireless device encoding/decoding tests and regression testing as well as protocol sequence tests such as registration, origination, termination, handover (option), and UE/NW release. It also supports application tests for voice communication, packet communication, and end-to-end communication (using two MD8480C units).

Optional GSM/GPRS/EGPRS features allow testing handover between W-CDMA/HSPA and GSM/GPRS/EGPRS. In addition, the MD8480C is well suited for the development of UMTS wireless devices supporting global bands and sophisticated application software.

Signaling Tester (Base Station Simulator)

The MD8475A Signaling Tester is an all-in-one base station simulator supporting LTE FDD, W-CDMA/HSPA/HSPA Evolution/DC-HSDPA, GSM/(E)GPRS,　and CDMA2000® 1X/1xEV-DO Rev. A. It supports service and call-processing tests for multimode LTE smartphones and mobiles with excellent cost-performance.